Environmental Chamber
Company requires the design and installation of a 60,000 to 300,000 Btu/h automated air enthalpy chamber. For the operation of this apparatus, the upper chamber will be operated over an ambient temperature range of -32 to 66°C (-25 to 150°F) and the lower chamber must simulate a wide range of indoor temperatures from 7 to 66°C (45 to 150°F). The chamber is to be a stacked configuration with an overall height of 26 feet with the upper chamber 14 feet tall and the lower chamber 12 feet tall. The floor area for both upper and lower chambers is to be 22 feet by 22 feet. The facility shall conform to the instruments and test requirements and provide the conditions specified in the attached document. The facility will use either the Outdoor Air Enthalpy or the Refrigerant Enthalpy method as the Standard Test Method secondary check to the performance results as prescribed in ASHRAE 37.
Airflow tunnels (code testers) should be supplied for both chamber rooms. The code testers should be integrated with the automated end-to-end DAS and provide required level of accuracy, ease of use and reliability. The code testers shall be designed and constructed in accordance with ASHRAE 37 by the Seller.
See attached: "Environmental Chamber Combined Docs" for further details.
***AMENDMENT 0003 - See attached document for Amendment 0003.
-------------------------------------------------------------------------
***AMENDMENT 0002 - See attached document for Amendment 0002. The proposal due date has been extended until 12 December 2024 at 1:00PM Eastern Time.
-------------------------------------------------------------------------
***AMENDMENT 0001 - See attached document for Amendment 0001. The proposal due date has been extended until 19 November 2024 at 1:00PM Eastern Time.
-------------------------------------------------------------------------
DESCRIPTION: The U.S. Army Corps of Engineers (USACE) Louisville District has issued Request for Proposal (RFP) Solicitation W912QR-24-R-0067 for the Design-Bid-Build new construction of a multi-purpose training range for Ft. Campbell. The project will construct a standard design Multipurpose Training Range (MPTR). Primary facilities include the MPTR, downrange site preparation, range operations control area (ROCA), range control tower (non-instrumented), small after-action review building, large operations/storage building, latrine, bleacher enclosure, covered mess, ammunition loading dock, bivouac area, unit staging area, and building information systems. Post Construction Award Services (PCAS) are included in this project. Supporting facilities include electric service; paving; storm drainage; site improvements; and information systems. Measures in accordance with the Department of Defense (DoD) Minimum Antiterrorism for Buildings standards will be provided. Access for individuals with disabilities will be provided. Cyber Security Measures will be incorporated into this project. Sustainability/Energy measures will be provided. Facilities will be designed to a minimum life of 40 years in accordance with DoD's Unified Facilities Criteria (UFC 1-200-02) including energy efficiencies, building envelope and integrated building systems performance.
The Contract Duration is at one thousand three hundred and seventy-three (1373) calendar days from Contract Notice to Proceed.
TYPE OF CONTRACT AND NAICS: This RFP is for one (1) Firm-Fixed-Price (FFP) contract. The North American Industrial Classification System Code (NAICS) for this effort is 236220 - Commercial and Institutional Building Construction.
TYPE OF SET-ASIDE: This acquisition will be a Full & Open competitive procurement.
SELECTION PROCESS: The proposals will be evaluated using a Best Value Tradeoff Source Selection process.
CONSTRUCTION MAGNITUDE: The magnitude of this construction project is anticipated to be between $25,000,000 and $100,000,000 in accordance with DFARS 236.204.
PRE-PROPOSAL CONFERENCE: A pre-proposal conference will be held and attendance is encouraged. Refer to FAR 52.236-27 Alt I
SOLICITATION WEBSITE: The official solicitation, when posted, will be available free of charge by electronic posting only and may be found at System for Award Management (SAM): Offerors shall have and shall maintain an active registration in the SAM database at http://www.sam.gov to be eligible for a Government contract award. If the Offeror is a Joint Venture (JV), the JV entity shall have valid SAM registration in the SAM database representing the JV as one business/firm/entity. If at the time of award an Offeror is not actively and successfully registered in the SAM database, the Government reserves the right to award to the next prospective Offeror.
POINT-OF-CONTACT: The point-of-contact for this procurement is Contract Specialist, Jacob S. Pridemore, at Jacob.S.Pridemore@usace.army.mil or 502-315-6228.
Solicitation Package4TN0320 attached, comprised of ther RLP plus Exhibits A_J
*Commission Ageements are not uploaded to this platform, but provided to Offerors via email.
U.S. GOVERNMENT
General Services Administration (GSA) seeks to lease the following space:
State:
Nashville, TN
City:
N: MLK Blvd./Charlotte Ave.
E: 3rd Ave.
S: Peabody St/7th Ave. S/10th Ave. S/Demonbreun St/Palmer Pl.
W: I-40
Delineated Area:
Office
Minimum Sq. Ft. (ABOA):
2,349
Maximum Sq. Ft. (ABOA):
2,701
Reserved Parking Spaces (Total)
0
Reserved Parking Spaces (Surface)
0
Reserved Parking Spaces (Structure)
0
Initial Full Term
15 years
Initial Firm Term
10 years
Termination Rights
90 days
Option Term
NA
Additional Requirements
Contiguous Space
office must be located on the second floor or higher. The space offered shall be contiguous on one floor with a minimum of 9’-0” ceilings throughout the space.
The space shall have a minimum column spacing of 20 foot on center.
Action: Choose whether or not a fully serviced lease is required. Also choose 100 year floodplain unless requirement is identified by agency as a critical action.
Offered space must meet Government requirements for fire safety, accessibility, seismic, and sustainability standards per the terms of the Lease. A fully serviced lease is required. Offered space shall not be in the [100] year flood plain.
Entities are advised to familiarize themselves with the telecommunications prohibitions outlined under Section 889 of the FY19 National Defense Authorization Act (NDAA), as implemented by the Federal Acquisition Regulation (FAR). ). For more information, visit: https://acquisition.gov/FAR-Case-2019-009/889_Part_B.
Offers Due:
11/8/2024[
Occupancy (Estimated):
[…TBD…]
Send Offers to:
Electronic Offer Submission:
Offers must be submitted electronically through the Requirement Specific Acquisition Platform (RSAP), located at https://lop.gsa.gov/rsap/.
Interested parties must go to the RSAP website, select the “Registration” link and follow the instructions to register. Instructional guides and video tutorials are offered on the RSAP homepage and in the “HELP” tab on the RSAP website.
Solicitation Number:
Solicitation (RLP) Number
4TN0320
Government Contact Information (Not for Offer Submission)
Role
Phone
Lease Contracting Officer
tyrekca.miller@gsa.gov
Leasing Specialist
Broker
212-326-1064
melissa.hein@gsa.gov
Note: Entities not currently registered in the System for Award Management (SAM) are advised to start the registration process as soon as possible.
SOURCES SOUGHT: THIS IS NOT A NOTICE OF REQUEST FOR QUOTATION BUT INFORMATION AND PLANNING PURPOSES ONLY. This notice does not constitute a commitment by the Government. No funds re available to pay for preparation of the responses to the is announcement. All information submitted in response to this announcement is strictly voluntary.
The Request for Quotation (RFQ) number is FA910125QBLADES and shall be used to reference any written responses to this source sought.
Arnold Engineering Development Complex (AEDC) at Arnold Air Force Base is issuing this Sources Sought Notice to determine the availability and technical capability of small and large businesses to meet the Government’s requirement for compressor stator blades and stator baskets. The North American Industry Classification Systems (NAICS) Code proposed is 333912, Air and Gas Compressor Manufacturing. The size standard for this NAICS is 1000 employees.
REQUIREMENT:
AEDC is seeking potential vendors to provide a complete set of compressor stator blades, front stator baskets, and rear stator baskets for an Allis Chalmers 1309 axial flow compressor.
The serial numbers for the compressors are 5108, 5109, 5110, 5111, 5112, and 5113.
The blades and baskets shall be made to the Original Equipment Manufacturer’s (OEM) specifications, unless the interested vendor has a newer, more maintenance friendly design without modification to the compressor casing, rotor, or rotor blades. The baskets shall be delivered with the blades installed to the correct fixed angle and ready for installation in the compressor casing. The baskets/blades must fit within the compressor casing and fit integral to the compressor rotor.
No stator blade, basket, or compressor casing drawings shall be provided nor will access to the compressors be granted to obtain measurements.
The compressor has the following performance parameters:
SUBMISSION DETAILS
Please provide a capability package including:
The capability package must be clear, concise, and complete. The Air Force is under no obligation to provide feedback to a company, or to contact a company for clarification of any information submitted in response to this request.
Proprietary information and trade secrets, if any, must be clearly marked on all materials. All information received that is marked Proprietary will be handled accordingly. Be advised that all submission become Government property and will not be returned. The government shall not be held liable for any damages incurred if proprietary information is not properly identified.
Please note: All vendors doing business with the Federal Government must be registered in the System for Award Management (SAM) database. The website for registration is www.sam.gov.
Responses may be submitted electronically to the following e-mail addresses: haley.smith.10@us.af.mil and bailey.deason@us.af.mil. Telephone responses will not be accepted.
RESPONSES ARE DUE NO LATER THAN 13 December 2024, 12:00 PM Central.
Future information about this acquisition, including issuance of a quotation and/or applicable amendments, will be issued through www.sam.gov. Interested parties are responsible for ensuring they have the most up-to-date information regarding this acquisition.
GSA seeks to lease 14,588 ABOA SF of office and related space in Memphis, TN.
U.S. GOVERNMENT
General Services Administration (GSA) seeks to lease the following space:
State:
Tennessee
City:
Jackson
Delineated Area:
On-Airport
Minimum Sq. Ft. (ABOA):
238
Maximum Sq. Ft. (ABOA):
238
Space Type:
Office
Parking Spaces (Total):
0
Parking Spaces (Surface):
0
Parking Spaces (Structured):
0
Parking Spaces (Reserved):
0
Full Term:
120
Firm Term:
60
Option Term:
N/A
Additional Requirements: N/A
Offered space must meet Government requirements for fire safety, accessibility, seismic, and sustainability standards per the terms of the Lease. A fully serviced lease is required. Offered space shall not be in the [1-percent-annual chance/0.2-percent-annual chance] floodplain (formerly referred to as [“100-year”/“500-Year”] floodplain).
Entities are advised to familiarize themselves with the telecommunications prohibitions outlined under Section 889 of the FY19 National Defense Authorization Act (NDAA), as implemented by the Federal Acquisition Regulation (FAR). ). For more information, visit: https://acquisition.gov/FAR-Case-2019-009/889_Part_B.
************************************************************************************************
Expressions of Interest Due:
12/11/2024
Market Survey (Estimated):
N/A
Occupancy (Estimated):
4/8/2025
Send Expressions of Interest to:
Name/Title:
Tyrekca Miller
Email Address:
Tyrekca.miller@gsa.gov
Government Contact Information
Lease Contracting Officer
Tyrekca Miller
******************FOR INFORMATIONAL PURPOSES ONLY--THIS IS NOT A SOLICITATION*************
***********************************************************************************************************************
PROJECT DESCRIPTION: The Nashville District, U.S. Army Corps of Engineers, intends to issue a Request for Quote (RFQ), for the fabrication and delivery for one (1) set of replacement components associated with the lower miter gate operating machinery at Pickwick Lock, Counce, TN 38326.
The specifications will be provided with the solicitation announcement and the solicitation post date is TBA. The intended delivery date is 365 calendar days after contract award.
NAICS CODE AND SBA SIZE STANDARD: 333612 with a size standard of 750 employees.
TYPE OF SET-ASIDE: 100% Total Small Business Set-aside
The James H. Quillen and Lexington VAMC Radiology requires contractual services to provide Mobile Computed Tomography (CT) Imaging Services to 11 rural Community Based Outpatient Clinics (CBOCs) in the Mountain Home VA and Lexington VA catchment areas. Mobile CT imaging services includes a primary self-propelled freightliner with box platform containing a fully diagnostic CT unit with table. Mobile vehicle will transport equipment and personnel to multiple locations on a rotating schedule. CT imaging equipment will be fully diagnostic CT unit to include table and all other equipment to be fully operational. Contractor to supply qualified technologist staffing and driver for mobile vehicle unit. The Contractor shall provide all labor, materials, equipment, maintenance, and repair of all Contractor-furnished equipment (including the mobile vehicle unit). The unit will be totally self-sufficient, to include a generator to generate electricity. No pad or other hook-ups will be provided. Contractor shall be responsible to maintain all of the equipment in good working order at all times and shall reimburse the VA for lost time, which may result from defective workmanship or equipment failure. Please see solicitation and attachments for more details.
The Arnold Engineering Development Complex (AEDC) is hosting the inaugural Strategic Partnering for Acquisition Development (SPAD) Industry Week on January 27-31, 2025. The purpose of the Industry Week is to educate industry partners for doing business with AEDC, enhance potential offerors’ understanding of AEDC’s mission, and the Government’s requirements for various projects related to services, research and development, construction, and supplies to support AEDC with anticipated execution in fiscal year 2026 and beyond. AEDC includes, but is not limited to: Arnold AFB, TN; Ames Research Center, Mountain View, and Edwards AFB, CA; Peterson SFB, CO; the Federal Research Center at White Oak, MD, Holloman AFB and White Sands Missile Range, NM; Wright-Patterson AFB, OH; and Hill AFB, UT.
The anticipated event structure is a high overview of specific projects, topics for doing business with the Government and specific mission areas, site tours on Arnold AFB, opportunities for networking, and public capability briefings (based on Government selection).
Location: University of Tennessee Space Institute (UTSI) in Tullahoma, TN
Anticipated Date: January 27-31, 2025 (travel days January 27 and 31)
Foreign participation is not authorized.
The attachment has the full registration details, which are due no later than 10:00 AM Central Time on December 20, 2024. We want to ensure we provide maximum benefit to the attendees during this industry week. Provide required information in one PDF or email and Capability Statement in one PDF.
ADDITIONAL INFORMATION: This announcement for the SPAD Industry Week does not constitute an invitation for bid or request for proposal. Any procurement action for this effort will be the subject of a separate, future announcement on SAM.gov. The Government is not under any obligation to award any related contract associated with this event.
The Government will not reimburse any potential vendors for any costs associated with preparing or submitting a response to this notice or participating in the Industry Week. Participation in the industry week is voluntary.
Interested, but cannot make the SPAD Industry Week? Email Ms. Brooke Vandeman at brooke.vandeman@us.af.mil and Ms. Erica Anglin at erica.anglin@us.af.mil to get added to the Vendor Database by providing your company information and primary NAICS. Additional information may be requested.
Check the SAM announcement for updates. Review the attachments section for additional information.
This is a combined synopsis/solicitation for commercial supplies prepared in accordance with the format in FAR Subpart 12.6 and FAR Subpart 13.106-1, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The is a Request for Proposal (RFP) and the solicitation number for this requirement is FA9101-25-B007.
See attachment for details.
This announcement is posted as a Request For Information (RFI) only for an intended upcoming. solicitation that will be posted on the SAM.gov website. This RFI is being issued to determine whether or not there are qualified sources that will be able to meet the requirements of this intended upcoming solicitation. This upcoming solicitation will be for Residential Reentry Center (RRC) services to include Home Confinement (HC) placements for male and female offenders within the city limits of Chattanooga, TN.
The solicitation is anticipated to be for an IDIQ contract with tiered pricing. There will be a guaranteed minimum and an estimated maximum number of placements, to include in-house and home confinement residents. It is anticipated that all services will be solicited under a single procurement and will require that the successful offeror provide all services.
The requirement is anticipated to be for an estimated maximum of 65 In-House RRC beds and the capacity to place 55 residents into the HC program. HC range is within 150 miles of the facility. At this time, we can neither foresee nor predict any factors that would precipitate a change.
The Bureau would like input from providers of services in the community as to the feasibility of providing these services in this geographical area.
Amendment 0001 -The purpose of this amendment is to publish questions and answers 1 through 10 for Boiler Inspections, Post-Wide. This is a solicitation for a non-personal services contract to provide post-wide boiler inspections to include proper labeling to all relevant boiler devices and equipment throughout Fort Campbell, KY/ TN. (See attached solicitation and associated attachments.)
Technical Specifications
20 Ton Industrial Water Chiller
1. General & Operational Data/Specifications
a. Must be rated for continuous usage
b. Ambient working limits: Minimum requirements are +14 Fahrenheit (ᴼF) or -10 Celsius (°C) through +113 ᴼF or 45 °C
c. Cooling capacity (Capacity based on 45 ᴼF or 7.22 °C water outlet temperature): 10 ᴼF or -12.22 °C delta at 95 ᴼF or 35 °C ambient temperature
i. Twenty (20) tons, minimum capacity
ii. 239,756 British thermal units (BTUs) per hour (BTUs/hr.), minimum capacity
d. Must be designed to use water as a medium
e. Cooling Water flow rate: 50 gallons per minute (GPM) or 189.27 liters (L), minimum flow rate
f. Head Pressure: Fifty (50) pounds per square inch (PSI) at a flow rate of 46 gallons or 174.12L per minute (GPM)
g. Refrigerant Type: R-410A
h. Noise rating: Not-to-exceed 69 decibels (dBs) at thirty-two feet (32’) or 10 meters (m)
2. Reservoir/Self-Contained Water Tank:
a. Fifty-five (55) gallon or 208.19L minimum capacity
b. Chiller is to only operate using water contained in a reservoir/self-contained tank; an external water supply IS NOT required, except to fill the reservoir/self-contained tank.
c. Tank is to be stainless steel.
3. Interfaces:
a. Power Supply:
i. Volts (V): 460V
ii. Phase: Three (3) phase alternating current (AC)
iii. Hertz (Hz): 60Hz
iv. Full Load Amps (FLA): Maximum of 60 FLA
b. Fluid Connections
i. System water supply: male pipe thread (MPT) two inches (2”) or 5.08 centimeters (cm)
ii. System water return: male pipe thread (MPT) two inches (2”) 5.08cm
c. Filling reservoir/self-contained tank with drain
4. Weight & Dimensions: System must fit within below dimensions (Note, Reservoir/Self-Contained water tank is included in these measurements
a. Dry Weight in pounds (lbs): Not-to-exceed two-thousand six-hundred sixty pounds (2,660 lbs) or 1206.55 kilograms (kg)
b. Width: Not-to-exceed forty-five inches (45”) or 114.3cm
c. Length/Depth: Not-to-exceed one-hundred inches (100”) 254cm
d. Height: Not-to-exceed ninety inches (90”) 228.6cm
5. Portability
a. Portability must be maintained while meeting all requirements in these specifications
b. System must be self-contained on a movable skid/frame
c. Skid/frame is to have lifting hole to allow forklift to move system
d. Only permitted items to be disconnected for portability are:
i. Power Source identified in 3.a.iv
ii. Fluid connections identified in 3.b.i and 3.b.ii
e. Drain reservoir/self-contained tank of water
6. Clearance Spacing. The following states minimum space must be provided between the system and an obstacle--
a. Side Clearances: Required clearance for any side of unit is not-to-exceed six and one-half feet (6.5’) or 1.98m
b. Top Clearance: Required clearance for top of unit is not-to-exceed ten feet (10’) or 3.04m
See attached vendor questions and answers (Q&A) from the technical evaluator.
The Department of Veterans Affairs seeks to lease in general area of LaFollette, TN approximately 5,000 ANSI/BOMA office area (ABOA) 6,750 Rentable Square Feet (RSF) square feet of contiguous space and a minimum of 25 on-site parking spaces. The number of reserved handicap parking spaces must meet the local code requirements. The space shall be contiguous space and the preference is the first floor of the building. This space shall be used as a Community Based Outpatient Clinic (CBOC) and will include personnel, furnishings, and equipment to meet the needs of Veteran outpatient care in the local area. This will be a full-service lease. The lessor will be responsible for all utilities, janitorial services, supplies, facility maintenance and repair, etc. of the leased space.
The Department of Veterans Affairs will consider space located in an existing building as well as land for new construction for build to suit. The building must comply with all current building, seismic, and accessibility code requirements. The space shall not be in a flood zone. The space sought is Class A /4-5 CoStar rated building. Space offered must be in a quality building of sound and substantial construction, either a new, modernized building, or one that has undergone restoration or rehabilitation for the intended use. Space shall be in a prime commercial office space with attractive, professional surroundings. Streets and public walkways shall be well maintained.
A fully serviced lease term up to 10 years will be considered.
On behalf of the Alvin C. York VA Medical Center, Network Contracting Office (NCO) 9 is issuing this Sources Sought Notice (SSN) as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for a firm-fixed-priced purchase order for Office Furniture Moving and Storage. The result of this market research will contribute to determining the method of procurement. The anticipated North American Industry Classification System (NAICS) code is 484210 Used Household and Office Goods Moving.
See attached Sources Sought Notice
PlasmaPro 100 Cobra 300 - Fluorine Etcher (Bosch Configuration)
Prepare a clear and concise description of the supplies or services that is not unnecessarily restrictive of competition and will allow a prospective offeror to make an informed business judgment as to whether a copy of the solicitation should be requested. The Federal Acquisition Regulation (FAR) has specific recommendations in Part 5. It is recommended that specific clauses should NOT be included in full, just referenced or attached. The description section does have a character cap (65,535), as it should be brief and include necessary details. Attachments and links can be added as needed for further documentation.
See additional details in: "Plasma Silicon Etcher Specification" document attached.
***THIS IS A REQUEST FOR QUALIFICATIONS ONLY – NO PRICING PROPOSALS WILL BE ACCEPTED AT THIS TIME***
The United States Department of Agriculture, Farm Production and Conservation (FPAC) Business Center is requesting professional qualification statements (SF-330s) from qualified firms for the architect and engineering (A-E) services of a licensed land surveyor for the performance of legal boundary surveys for projects located throughout the State of Tennessee.
The Contractor shall be licensed and registered in the State of Tennessee. The Contractor shall provide legal boundary surveys and re-surveys of easements under the Agricultural Conservation Easement Program components: Wetland Reserve Easements (WRE), Emergency Watershed Protection Program-Floodplain Easements (EWPP-FPE); Health Forest Reserve Program (HFRP); and all Farm Bill 2018 Regional Conservation Partnership Program (RCPP) U.S. held easements, RCPP-HRFP, and RCPP-WRE easements.
Survey work shall consist of performing all surveys, measurements, computations, drawings, and descriptions according to attached Land Survey Specifications for NRCS Easement Programs.
This acquisition is for A-E services and is procured in accordance with the Selection of Architects and Engineers statute as implemented in Federal Acquisition Regulation (FAR) Subpart 36.6. A-E firms meeting the requirements described in this announcement are invited to submit the documentation required of this notice. Firms responding to this announcement before the closing date will be considered for selection, subject to any limitation indicated with respect to business size or any other limitations listed in this notice.
Firms that submitted an SF-330 Professional Qualification Statement in response to 12FPC324R0004 that was accepted for meeting minimum qualifications for work in Tennessee, will be automatically considered and may update their package at this time, if necessary. Please provide notification if you no longer wish to be considered,
Survey work shall consist of performing all surveys, measurements, computations, drawings, and descriptions according to attached Land Survey Specification Attachment 1A and 1B.
See the Instructions to Offerors and referenced attachments for complete details.
Attachments:
Attachment 1A – Land Survey Specification rev June 2018 with addendum
Attachment 1B – Land Survey Re-establishment Specification rev June 2018
Attachment 2 – Past Performance Questionnaire
The purpose of this solicitation is for the Government to obtain a quantity of one, brand name Anton Paar Density Meter. To meet this requirement, the vendor shall supply a density meter meeting the specification outlined in Attachment 1 – Density Meter Specifications.
Synopsis: Repair HVAC Base-wide - SOURCES SOUGHT.
This is a SOURCES SOUGHT SYNOPSIS. The purpose of this synopsis is to gain knowledge of potential sources for this requirement including interested Small Business sources. This notice is for planning purposes only. All interested parties should respond. The Tennessee Air National Guard, Memphis ANG Base, Memphis, TN has been tasked to replace facility boilers and compressors in four (4) buildings as specified in the Statement of Work. Repair facilities B2890, B4625, 2886, and B2860 conditioned space by replacing the existing units; Replace 75 pounds worth of failing R-22 Compressors with high efficiency non-ozone depleting HVAC units in those same facilities. Each compressor and associated equipment shall include a new fan coil unit, associated copper piping, thermo-expansion values, solenoids, a new 2-inch insulated copper drain line including new insulation for all installed copper lines. Install required and proper amount of refrigerant, to properly charge and operate the system. In each building replace two boilers which include replacement of two circulating pumps, two motor starters for the pumps, two flow switches, four isolation valves, replace insulation to match existing insulation, two solenoid valves, six temperatures gauges and five pressure gauges. After installing the boiler, ensure that the system maintains a 35% glycol mix.
Proposed project will be a Firm Fixed Price contract. The type of solicitation issued will depend upon the responses to this synopsis. No reimbursement will be made for any costs associated with providing information in response to this synopsis or any follow up information requests. The purpose of this synopsis is to gain knowledge of interest, capabilities and qualifications of various members of the Small Business Community to include Section 8(a), Historically Underutilized Business Zones (HUB-Zone), and Service-Disabled Veteran-Owned Small Business (SDVOSB) to compete and perform a Firm Fixed Price Contract. All interested concerns will provide this office, in writing, a notice stating their positive intention to submit a quote as a prime contractor no later than 16 Dec 2024, 12:00 P.M. EST. This notification, which shall not exceed five typewritten pages, must include a signed Sources Sought Information Request Form (attached to this posting). In the event adequate Small Business contractors are not available for adequate competition for this project, it may be advertised as unrestricted. Information shall be provided via email to Christopher Rhyne, Contracting Officer, Tennessee Air National Guard, Memphis ANG Base, Memphis, TN 38118. christopher.rhyne.1@us.af.mil. No facsimile responses will be honored.
The purpose of this notice is to gain knowledge of potential interested sources including Small Businesses in Tennessee (TN). This notice is for planning purposes only. All interested parties should respond.
The TN National Guard (TNARNG) intends to solicit for a Catered Meals Services to feed soldiers that are in Inactive Duty Training (IDT) or Annual Training (AT) status in 66 different locations throughout the state of Tennessee. IDT training events conducted monthly and expected to have more than one (1) unit drilling at the same dates but different locations. Drilling days are usually on Saturdays and Sundays.
The TNARNG intends to award single or multiple award Indefinite Delivery Indefinite Quantity (IDIQ) contracts. The IDIQ will consist of five (5) year ordering period, and an option to extend six (6) additional months. Attached is a list of locations that requires catered meals each month.
All interested firms will provide this office in writing, a notice stating their positive intent to submit a proposal as a prime contractor and note which locations in the location spreadsheet your firm can service. Response must also include the following: Company Name, Cage Code, UEI, email address, company address, telephone number, POC, and size and type of ownership (Small business, Large Business. 8(a), etc.).
Responses must be submitted to sinamar.b.benauro.civ@army.mil and teresa.a.baxter.civ@army.mil no later than 20 November 2024 at 10:00 AM CST.
Solicitiation Package comprised of RLP and Exhibits A-I
*Commission Ageements are not uploaded to this platform, but provided to Offerors via email.
EXERCISE OF OPTION YEAR 2
