The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract with Lowest Price Technically Acceptable (LPTA) Evaluation Factors for the item listed below. The required item is for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.
The Contract Line Items (CLINs) are as follows:
P-250 MODULAR HYDRAULIC TEST BENCH QUANTITY: 1 U/I: EA
The requirement will be solicited as a total small business set aside. BRAND NAME ONLY. The NAICS code applicable to this procurement is 332912, Fluid Power Valve and Hose Fitting Manufacturing with a size standard of 1,000 employees. The Product Service Code is 4940.
The anticipated delivery date for this acquisition is 30 days after contract award. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. THE SOLICITATION IS NOT YET AVAILABLE.
The solicitation number is SPMYM125Q0025 and it is expected to be available on or about 11 December 2024 and posted to SAM.gov, https://sam.gov/ Quotes will be due by 5:00 PM EST on 16 December 2024. Responses to the solicitation notice shall be emailed to the attention of Monica Richardson as monica.richardson@dla.mil Please make sure that the solicitation number (SPMYM125Q0025) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.
Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. Prospective Offeror's should also register on the interested vendor list under SPMYM125Q0025. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed.
All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to Monica Richardson at monica.richardson@dla.mil.
SOURCES SOUGHT SYNOPSIS
The Defense Logistics Agency Richmond is issuing a sources sought synopsis as a means of conducting market research to identify parties that have interest and the resources to support this requirement for NSN 5995-013271532; Current source(s): APTIV SERVICES 3 (US), LLC (53669) P/N 70902-21027-104. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 335931
THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the Government assumes no financial responsibility for any costs incurred.
If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements.
The Government will evaluate market information to ascertain potential market capacity to
1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated
2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements
3) implement a successful project management plan that includes: compliance with tight program schedules; cost containment; meeting and tracking performance; hiring and retention of key personnel and risk mitigation; and
4) provide services under a performance based service acquisition contract
BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services are invited to submit a response to this Sources Sought Notice by 16 Dec 2024 2:00 pm EST. All responses under this Sources Sought Notice must be emailed to ladonna.groven@dla.mil
If you have any questions concerning this opportunity, please contact: LaDonna Groven
Email: ladonna.groven@dla.mil
APPENDIX 1: Purpose and Objectives
Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s). Generally, this entails the procurement/manufacturer of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award.
Technical Orders and Qualification Requirements are not available.
The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract with Lowest Price Technically Acceptable (LPTA) Evaluation Factors for the item listed below. The required item is for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.
The Contract Line Items (CLINs) are as follows:
P-250 MODULAR HYDRAULIC TEST BENCH QUANTITY: 1 U/I: EA
The requirement will be solicited as a total small business set aside. BRAND NAME ONLY. The NAICS code applicable to this procurement is 332912, Fluid Power Valve and Hose Fitting Manufacturing with a size standard of 1,000 employees. The Product Service Code is 4940.
The anticipated delivery date for this acquisition is 30 days after contract award. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only.
The solicitation number is SPMYM125Q0025 and it is expected to be available on or about 11 December 2024 and posted to SAM.gov, https://sam.gov/ Quotes will be due by 5:00 PM EST on 16 December 2024. Responses to the solicitation notice shall be emailed to the attention of Monica Richardson as monica.richardson@dla.mil Please make sure that the solicitation number (SPMYM125Q0025) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.
Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. Prospective Offeror's should also register on the interested vendor list under SPMYM125Q0025. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed.
All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to Monica Richardson at monica.richardson@dla.mil.
COMBINED SYNOPSIS/SOLICITATION #: N0017825Q6653
Submitted by: James Embrey
NAICS Code: 334515
FSC/PSC Code: 7K20
Anticipated Date to be published in SAM.gov: 12/11/2024
Anticipated Closing Date: 12/19/2024
Contracts POC Name: James Embrey
Telephone#: 540-498-5241
Email Address: james.d.embrey3.civ@us.navy.mil
Code and Description: N00178 HandHeld Analyzer
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.
Synopsis/Solicitation N0017825Q6653 is issued as a Request for Quotation (RFQ). The synopsis/solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Regulation as indicated in the attached SF1449. The SF1449 form is being utilized to generate the applicable clauses from the Standard Procurement System.
This requirement is not eligible for small business set-aside.
Material must be TAA compliant.
The Naval Surface Warfare Center Dahlgren Division (NSWCDD) intends to award on a sole source basis for the following products manufactured by Dewetron INC: TrioNet 3 Power Analyzer P/N PT-SM-TRIONET3-PA, Moduel P/N TRION-1820-POWER-4, Sub Module, 4Input Ranges P/N TRION3-1820-POWER-4, Service/Calibration P/N ACCRED-CAL-TRION-POWER-US, and Service/Calibration P/N ACCRED-CAL-SUB-X-US. Dewetron INC is located in East Greenwich, RI. The Offeror shall ensure they can provide the requirements listed in the attached Requirements List.
The required handheld portable analyzer is used to measure digital and electronical signals during missile integration testing to verify ship functions for US and Ally such as NATO Consortium assets. Dewetron provides the only device that can support
the optimization required to support current software configurations with the current MSU power control laptop. No other brand has the same form factor, with this I/O and resolution. The required equipment meets
configurations for 1553 data support, ethernet control, form factor, 8 isolated channels and provides reliable tech support. Utilizing another brand will require unbudgeted and
unanticipated reengineering to make another data analyzer function with the required testing.
Please include shipping/freight cost to Dahlgren, VA 22448-5114. Simplified Acquisition Procedures (SAP) will be utilized for award in accordance with FAR Part 13. The order shall be firm fixed price.
All responsible offerors must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3. Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied FAR Part 19. All offerors may submit a capability statement, proposal, or quotation which shall be considered by the agency. The completion and submission to the Government of an offer shall indicate the Offeror’s unconditional agreement to the terms and conditions in this solicitation. Offers may be rejected if an exception to the terms or conditions set forth in this solicitation is taken.
At time of proposal submission please submit any historical data and published pricing. Award will be made based on Lowest Price Technically Acceptable.
In order to be eligible for award, firms must be registered in the System for Award Management (SAM). Offerors may obtain information on registration in SAM by calling 866-606-8220, or via the Internet at https://www.sam.gov.
Quote is due 19 December 2024, no later than 12:00 p.m. EST with an anticipated award date by 30 January 2025. Questions and responses regarding this synopsis/solicitation may be submitted by e-mail to james.d.embrey3.civ@us.navy.mil to the RFQ closing. Please be sure to include Synopsis/Solicitation Number N0017825Q6653 in the subject line.
Attachments –
-SF1449: Solicitation for Commercial Items
-Requirements List
Please see attached Sources Sought SS-25-014
This solicitation will contain one NSN for a TRACK, SLIDING DOOR. A letter Request for Proposal (RFP) will be solicited for award of a firm fixed price contract. The original equipment manufacturer and only approved source is SIKORSKY AIRCRAFT CORPORATION 78286 P/N 70217-02702-554. The NSN and quantity are as follows: NSN 5340-015936442, quantity 300 each. The delivery schedule is 199 days ARO. FOB: Origin; Inspection/Acceptance: Destination. This is a proprietary item to SIKORSKY AIRCRAFT CORPORATION, coded 3C. The Government intends to place firm-fixed price, against BOA SPE4A1-22-G-0005. This solicitation will be issued in accordance with (IAW) 10 U.S.C. 2304(c) (1), other than full and open competition. The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation.
Conditions for evaluation and acceptance of offers for part numbered items cited in the PID: This agency has no data available for evaluating the acceptability of alternate products offered. In addition, to the data required in Procurement Note: L04/M06, the offeror must furnish drawings and other data covering the design, materials, etc., of the exact product cited in the PID, sufficient to establish that the offeror’s product is equal to the product cited in the PID.
The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with the approved source. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty-five days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.
The anticipated letter solicitation issue date will be December 26, 2024, and anticipated close date will be January 10, 2025. The solicitation will not be available via the DLA-BSM Internet Bid Board System (DIBBS) website. You may request a copy by contacting the Acquisition Specialist at email: lionel.allamby@dla.mil
The Contractor shall supply all supervision, labor, material, and equipment as required to replace Air Handling Unit #3, located on the roof at Oceana-3030. In general, the Scope of Work includes secure all electrical power to the Air Handling Unit (AHU #3) utilizing OSHA approved Lockout/ Tag out procedures. Disconnect and remove all wiring to the AHU, to include control wiring, temperature sensors, water valve actuators, damper actuators, low ambient temperature cutout, and any conduit or junction boxes and gauges mounted on the AHU or its piping. Materials shall be selectively disconnected, protected from damage and may be reused for new installation. Demolish as needed, insulation and metal jacket to disconnect water piping to the AHU. Existing piping may be reused if applicable to the new installation. Demolish and dispose of existing Air Handler Unit (AHU #3) complete. Provide all necessary equipment to remove and properly dispose of existing equipment. Provide and install (QTY 1) Air Handling Unit that meets or exceeds the existing specifications. Provide new outside air dampers and actuators. Contractor shall ensure the new AHU, outside air damper actuator and all controls are compatible with existing Direct Digital Controls (DDC) to ensure proper function and operation. All AHU specifications shall be verified by the contractor including dimensions, unit capacity, and electrical specifications.
ONLY CONTRACTORS ON THE UTILITY MECHANICAL CONSTRUCTION FOR HR MACC CONTRACT HOLDERS: N4008523KD0043-0048 CAN BID ON THIS PROJECT.
THIS IS AN OTHER THAN FULL AND OPEN SOLICITATION. ONLY VENDORS THAT WILL BE OFFERING MANUFACTURER FTG AEROSPACE INC. (6LMJ1) P/N 655161-5 under PR number 1000193347 to establish an Indefinite Quantity Contract (IQC). The Government intends to place a firm-fixed price, 5-year base with NO option LONG TERM CONTRACT
NSN: 5995-01-413-6502; CABLE ASSEMBLY, PRIN; CRITICAL APPLICATION ITEM; EXPORT CONTROL REQUIREMENTS; NO SURGE REQUIREMENT; NAICS 334419
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.
Required delivery is 170 days. Stock delivery locations will be to any facility in the Continental United States as cited on each delivery.
Pricing will be evaluated on the Estimated Annual Demand (EAD) - 30 each. The Guaranteed Minimum will be cited in the solicitation.
There will be a 2-year base with one 3-year option, for a total of five years. Terms are FOB Origin and Inspection/Acceptance Destination for DLA Direct.
Solicitation scheduled release date is tentatively 26 December 2024. Electronic (DIBBS) proposals/quotes are acceptable. Proposals are to be submitted to the Bid Custodian. A copy of the solicitation will be available via the BSM Internet Bid Board System (DIBBS) Homepage (https://www.dibbs.bsm.dla.mil). Select "Request for Proposal (RFP)" under the Solicitations heading. Then choose the RFP you wish to download. RFPs are in portable document format (PDF). To download and view these documents you will need the latest version of Adobe Acrobat Reader. This software is available free at http://www.adobe.com. A paper copy of this solicitation will not be available to requestors.
Solicitation Number SPE4A625Q0381
Solicitation will result in a Purchase Order IAW FAR 13.5. The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation. The solicitation date is anticipated to be December 13, 2024. A copy of the solicitation will be available via the DIBBS Website https://www.dibbs.bsm.dla.mil/ on the issue date cited in the RFQ. From the DIBBS Homepage, select RFQs. Then search for and choose the RFQ you wish to download. RFQs are in portable document format (PDF). To download and view these documents you will need the latest version of Adobe Acrobat Reader. This software is available free at: http://www.adobe.com.
Surplus dealers, small business dealers and distributors (having existing stock of surplus or newly manufactured material) are invited to respond to this synopsis. The response should include a completed surplus certificate, DLAD 52.211-9000, Government surplus Material or adequate traceability documentation to show that the product is acceptable. In addition, respondents should identify quantity available and price. The government may alter the acquisition strategy if purchase of existing surplus or newly-manufactured inventory is in the best interest of the Government.
NSN: 3130011001701. BEARING,ELASTOMERIC. Approved Source(s): LORD CORP/76005 and SKF, USA INC./80201. Terms are FOB Origin, Inspection and Acceptance at Origin. First Destination Transportation applies. Item has QCC of RCM. Requested quantity is 1,969 each. This item is a source controlled Navy Critical Safety Item and a Critical Application Item. This item includes Contractor First Article Testing, and export control and shelf-life requirements. Requested delivery of 354 days ARO. This NSN is commercial of a type and will utilize solicitation and award procedures IAW FAR 13.5. Other Than Full and Open Competition, Unrestricted.
This RFI is intended for market research to determine potential and eligible vendors capable of providing engineering and technical services in support of Norfolk Naval Shipyard Engineering and Planning Department (EPD) Disciplines and Waterfront Projects described below prior to determining the method of acquisition. The U.S Government is not obligated to and will not pay for any information received from potential sources as a result of this notice.
Interested parties must be vendors on the current SeaPort-NxG IDIQ.
The DLA Aviation Richmond is issuing this source sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement:
NSN: 5995-01-665-6770
Nomenclature: CABLE ASSEMBLY, SPEC
Solicitation: SPE4A6-25-R-0092
The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 335931.
THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred.
If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements.
The government will evaluate market information to ascertain potential market capacity to 1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; 3) implement a successful project management plan that includes: compliance with tight program schedules; cost containment; meeting and tracking performance; hiring and retention of key personnel and risk mitigation; and 4) provide services under a performance based service acquisition contract.
BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services are invited to submit a response to this Sources Sought Notice by December 17, 2024 at 11:59pm Eastern standard time. All responses under this Sources Sought Notice must be emailed to patsy.bedford@dla.mil.
If you have any questions concerning this opportunity, please contact: Patsy.Bedford@dla.mil,
PLEASE REVIEW THE FOLLOWING MULTIPLE SOURCES ITEM:
NSN: 5306-01-053-9319
MONADNOCK COMPANY, THE
CAGE 60119, P/N 120000-6-4
HOWMET GLOBAL FASTENINGS SYSTEMS
CAGE 29372, P/N CA21037-6-4HS
PLEASE PROVIDE US WITH ANY SOURCES THAT ARE ABLE TO MANUFACTURE THIS ITEM. PLEASE ALSO PROVIDE THE LOCATION OF THE MANUFACTURER (CITY/STATE), CAGE, AND POINTS OF CONTACT, IF AVAILABLE.
DLA AVIATION DOES NOT POSESS A TECHNICAL DATA PACKAGE FOR THIS ITEM.
Synopsis:
Title: NSN 5130-013630964, WRENCH,IMPACT,ELECT, WSDC: 36A
NAICS code: 444210
Notice ID: SPE4A725R0225
Federal Organization: SPE4A7
This solicitation will result in a Firm Fixed Price Contract.
NSN NSN 5130-013630964, WRENCH,IMPACT,ELECT
Quantity: 828 each
Delivery days after receipt of order: 248 days
Inspection & Acceptance at Source / FOB Origin
Critical Application Item
Approved sources:
If an offer submitted to the solicitation is over $750,000 a subcontracting plan will be required with the offer. Certified cost and pricing data is required for proposals over $2,000,000.00. In order to receive an award, regardless of dollar value, you must be registered in the System for Award Management (SAM). SAM registration is at https://www.sam.gov.
Alternate offerors must submit a Source Approval Request (SAR) package along with a completed copy of the solicitation in order to be considered for an award. If time does not permit evaluation of SAR packages, the alternate offer will not be reviewed for this procurement but, if approved, will be considered for future procurements. The final contract award decision may be based upon a combination of price, past performance and other evaluation factors as described in the solicitation utilizing the Supplier Performance Risk System (SPRS).
The final contract award decision may be based upon a combination of price, past performance and other evaluation factors as described in the solicitation. A copy of the solicitation will be available via the DLA Internet Bid Board System (DIBBS) at DIBBS RFP/IFB/Other RFQs Search Page (dla.mil) on the issue date cited. Enter the solicitation number within the search value area and click the submit button. Solicitations are in portable document format (PDF). To download and view these documents, the latest version of Adobe Acrobat Reader is required. A paper copy of this solicitation will not be available to requestors.
The solicitation will be issued on/around December 30,2024 and close on January 30, 2025
This solicitation is for an Indefinite Quantity Contract, which includes a 5 Year Base period with no option periods for NSN 4235-01-668-9796. The guaranteed minimum quantity for this contract is 24 each. The EAD quantity is 36. The part being procured is a Spill Containment U. IAW Basic Concepts, Inc.; CAGE: 0V4E7; P/N: BCI-ATB-50K-KIT. The required delivery schedule is 97 days. This item has not been identified as CSI. FOB Destination. Inspection and Acceptance is Destination. DLA Aviation Richmond currently does not have an approved technical data package available for this NSN.
Solicitation issue date is January 3, 2025. A copy of the solicitation will be available via the DIBBS Website https://www.dibbs.bsm.dla.mil/ on the issue date cited in the RFP. From the DIBBS Homepage, select “Requests for Proposal ( RFP ) / Invitation For Bid (IFB)” from the menu under the tab “Solicitations.” Then search for and choose the RFP you wish to download. RFPs are in portable document format (PDF). To download and view these documents you will need the latest version of Adobe Acrobat Reader. This software is available free at: http://www.adobe.com. A paper copy of this solicitation will not be available to requestors.
QUESTIONS ARE DUE BY 12:00 EST December 12, 2024 and Answers will be posted by COB Friday December 13, 2024. Please send any questions to kelly.voigts.3@us.af.mil
SITE VISIT UPDATE:
The site visit has been changed to December 10, 2024 at 2:00 PM EST. Please follow the same instructions below regarding requesing base access for site visit date. Also please find the attacehd updated SOW and images. NO DRONES ALLOWED ON BASE.
Facility 1302 in Langley Air Force Base requires the services of a Virginia Licensed General Contractor to provide all materials, equipment and labor to clean, and discard all the debris from all the gutters on building 1302. Approximately 830' of the gutters require repair of any leaking seams or holes in the gutter.
A site visit will be accomplished on December 5, 2024 at 10:00 AM EST. If you require a pass to access the facility for this visit, please reach out to Kelly Voigts at kelly.voigts.3@us.af.mil immediately to ensure quick processing of your request. All questions are due 10 December 2024 by 5:00 PM EST and quotes will be due December 16, 2024 at 5:00 PM EST no exceptions.
All other details and requirements for this solicitation can be found in the attached SOW and combo solicitation.
Science Labs for Grades 6-12: The Contractor shall provide the required student and teacher resources for three middle school courses, Biology in the Living World, Chemistry in the Earth System, and Physics in the Universe.
Science Labs for AP® Instructional Resources: The Contractor shall provide lab kits as required for AP® Biology, AP® Chemistry, and AP® Environmental Science. Each kit shall serve 30 students.
For additional information, please see the solicitation (HE125425QE011) and attachments.
Amendment 0001 updates: Attachment 9 - Material Instructions has been removed from the solicitation as well as the 52.212-1 Addendum. Attachment numbers have been updated accordingly.
Amendment 0002 updates: RFQ submission deadline has been extended to 10 JAN 2025.
PR No: 7006981355. This solicitation will contain 1 NSN for a BOLT,INTERNAL WRENC. This solicitation is for award of a Firm Fixed Price Contract. The NSN and quantities are as follows:
NSN: 5306-01-053-9319
MONADNOCK COMPANY, THE
CAGE 60119, P/N 120000-6-4
HOWMET GLOBAL FASTENINGS SYSTEMS
CAGE 29372, P/N CA21037-6-4HS
Quantity: 42668 Each
Delivery: FOB Origin, Inspection/Acceptance at Destination
Surge requirements do not apply.
Solicitation will be a small business set aside competition. The final contract award decision may be based on a combination of price, past performance, and other evaluation factors as described in the solicitation. A 100% Quantity Option will not apply. A REVERSE AUCTION will take place if two or more qualified proposals are received. The anticipated issue date is on or about January 6, 2025.
Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty-five days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
A copy of the solicitation will be available via the DIBBS on or about January 6, 2025 at https://www.dibbs.bsm.dla.mil/ on the issue date cited in the RFP. Choose the RFP you wish to download. RFPs are in portable document format (PDF). To download and view these documents you will need the latest version of Adobe Acrobat Reader. This software is available free at http://www.adobe.com. A paper copy of this solicitation will not be available to requesters. All documentation pertaining to the Kit and its components will be posted on the FTP site once the solicitation is posted.
This requirement is a sole-source requirement (see attached: sole-source justification) for the performance of quarterly preventive and as-needed corrective maintenance on one (1) SEM Disintegrator Model 23/5 S/N: 05J06348, located at B420 room A147, onboard Naval Station Dam Neck Annex, Virginia Beach, Va. See attached Combined Synopsis/ Solicitation for full details, instructions and evaluation specifications, and, terms and conditions pertaining to this requirement.
THIS WILL BE ISSUED AS AN OTHER THAN FULL AND OPEN SOLICITATION. ONLY VENDORS THAT WILL BE PROPOSING APPROVED SOURCES OF SUPPLY ARE WHEELER FLEET SOLUTIONS, CO. (55683); OSHKOSH DEFENSE LLC (75Q65) OR GROVE U.S. LLC (12361) under PR number 1000192881 to establish an Indefinite Quantity Contract (IQC). The Government intends to place a firm-fixed price, 5-year base with no option IQC for material manufactured by one of the approved sources listed above.
SOLICITATION: SPE4A625R0049
NSN: 6150-01-474-9272, 6150-01-184-1901, 6150-01-413-7951, 6150-01-474-9285; CABLE AND CONDUIT A; CABLE ASSEMBLY, SPEC, CABLE, ASSEMBLY, POWER; CRITICAL APPLICATION ITEM REQUIREMENTS; NAICS 334419 and 333992
Required delivery is 100 to 140 days respectively. Stock delivery locations will be to any facility in the Continental United States as cited on each delivery.
Pricing will be evaluated on the Estimated Annual Demand (EAD) – 10 to 32 each. The Guaranteed Minimum will be cited in the solicitation.
There will be a 5-year Base with no option, for a total of five years. Terms are FOB Origin and Inspection/Acceptance Destination for DLA Direct.
Solicitation scheduled release date is tentatively 27 December 2024. Electronic (DIBBS) proposals/quotes are acceptable. Proposals are to be submitted to the Bid Custodian. A copy of the solicitation will be available via the BSM Internet Bid Board System (DIBBS) Homepage (https://www.dibbs.bsm.dla.mil). Select "Request for Proposal (RFP)" under the Solicitations heading. Then choose the RFP you wish to download. RFPs are in portable document format (PDF). To download and view these documents you will need the latest version of Adobe Acrobat Reader. This software is available free at http://www.adobe.com. A paper copy of this solicitation will not be available to requestors.
NASSCO is awarded Rudder Repair for USS BATAAN in continuation of N00024-24-C-4418. See attached J&A.
********************Update to Transportation Security Administration’s (TSA) Open Architecture (OA) initiatives notice.**************************************
The Transportation Security Administration (TSA) is posting this announcement to provide interested entities an opportunity to obtain access to information (up to Sensitive Security Information (SSI)) regarding the next generation Open Architecture (OA) solutions and applications.
The goal of sharing this information is to provide industry an understanding of the next generation OA solutions and applications and enable them to provide feedback to TSA. Industry feedback will help TSA understand industry capability and product development for OA solutions and applications and allow TSA to gauge viability of future Open Architecture requirements. Industry feedback received early in the planning and development process will provide TSA necessary information for decision making. Additionally, industry feedback may identify opportunities for Industry to participate in non-funded OA proof-of-concepts/demonstrations of prototypes that work with TSA Open Architecture solutions.
Requests for OA SSI access, shall include specified information as listed in the attached document titled "Open Architecute Vetting Instructions" and shall be submitted to the address provided in the "Open Architecute Vetting Instructions" document no later than 2:00 PM EST on February 28, 2025.
********************Update to Transportation Security Administration’s (TSA) Open Architecture (OA) initiatives notice.**************************************
TSA has updated the "OAStakeholderComment Form" with Instructions. Please utilize the attached "OAStakeholderComment FormRev1" for all comments to be submitted no later than September 30, 2024.
************************************************************************************************************************
Update to Transportation Security Administration’s (TSA) Open Architecture (OA) initiatives notice.******************
**************************************Update to Request for Information (RFI) 70T04024I7573N001.****************************************
The Transportation Security Administration (TSA) is extending the attached Request for Information (RFI) 70T04024I7573N001 written response due date to no later than Friday, June 7, 2024 at 12:00pm EDT to siobhan.mullen@tsa.dhs.gov and siobhan.lawson@tsa,dhs.gov. It is the Respondent’s responsibility to ensure the Government receives the Respondent’s email submission.
********************Update to Transportation Security Administration’s (TSA) Open Architecture (OA) initiatives notice.******************
The Transportation Security Administration (TSA) is issuing the attached Request for Information (RFI) 70T04024I7573N001 to conduct market research to better understand vendor capabilities, qualifications, approaches, costs, risks, and technical challenges with system components and subsystems of TSA’s open architecture vision of a connected transportation security system of systems.
Written questions concerning this RFI should be emailed to siobhan.mullen@tsa.dhs.gov and siobhan.lawson@tsa.dhs.gov no later than May 17, 2024 at 12:00pm EDT, Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Respondents shall provide written responses to this RFI no later than Monday, June 3, 2024 at 12:00pm EDT to siobhan.mullen@tsa.dhs.gov and siobhan.lawson@tsa,dhs.gov. It is the Respondent’s responsibility to ensure the Government receives the Respondent’s email submission.
This RFI is issued solely for market research, planning, and information purposes in order to assist TSA. The Government will review vendor responses for market research purposes only. The Government does not intend to provide a response to submissions for this RFI, but the Government reserves the right to hold a technical information exchange meeting with all, none or some of the submitters, after review of the RFI submissions, at the agency’s discretion.
********************Update to Transportation Security Administration’s (TSA) Open Architecture (OA) initiatives notice.******************
Opening of comment period:
This update is to provide notice that TSA is opening the comment period and requesting feedback from industry partners on TSA’s Open Architecture (OA) solutions to include the Digital Imaging and Communications in Security (DICOS) Software Development Kit (SDK), Open Platform Software Library (OPSL) SDK, and associated related solutions. Please complete the attached comment form and submit the OASupport@tsa.dhs.gov to document inputs regarding the current scope of the SDKs or proposed features or capabilities to be implemented in a future version. The comment period closes on September 30, 2024. TSA expects to establish a consistent structure to provide open comment periods in the future and all comments received after the comment period close will be considered as part of the next comment period.
Comments will be reviewed and adjudicated by the TSA Technical Review Committee as they are received. After review, some may be included in a future SDK release. TSA intends to post or share responses to the comments received, outline the features or capabilities that are approved for future implementation, and share the expected development plans to support continued collaboration in the establishment of common and accessible data and interface standards. Additional communication will be forthcoming after the comment period closes regarding next steps.
Disclaimer
This Request for Comments is issued for information and planning purposes only and does not constitute a solicitation. All information received in response to this request will be considered anonymous. The Government will not return or pay for any information provided in response to this announcement; no basis for a claim against the Government shall arise as a result from a response to this notice or Government use of any information provided. This request does not constitute a Request for Proposal (RFP) or any commitment or intent to issue an RFP, Broad Agency Announcement (BAA), or solicitation. Not responding to this request does not preclude participation in any future solicitation. The information provided in this request is subject to change and is not binding on TSA. All submissions become the property of TSA and will not be returned. Additionally, it should be noted that TSA is requesting information to identify various solutions to support open architecture that are currently available or being developed.
Contact OASupport@tsa.dhs.gov to request access to the latest versions of the SDKs and relevant documentation as needed.
TSA reserves the right to hold technical information exchange meetings with all, none, or some of the submitters at the agency’s discretion.
________________________________________________________________________________________________________
**********TSA Open Architecture Industry Day – June 18, 2024********
Introduction
The Transportation Security Administration (TSA) is hosting an Industry Day on TSA’s Open Architecture (OA) initiatives, and invites industry, academia, national labs, Department of Homeland Security (DHS) components, and government stakeholders to attend. The objectives of the Industry Day are to:
Background
TSA’s mission is to protect the Nation’s transportation systems to ensure freedom of movement for people and commerce. To achieve this mission in an evolving threat environment, TSA must prioritize being an agile and flexible organization which can rapidly field innovative screening solutions capable of improving TSA’s security posture. Leveraging an OA design approach will allow TSA to improve its security posture, support its frontline workforce, and promote an improved customer experience.
OA is a design approach in which equipment components, such as software and hardware, are standards-based and interoperable to allow a wide range of industry partners to create improved subcomponents (i.e, new detection algorithms, user interfaces, reporting systems). Using this approach will allow TSA to establish a superior transportation security System of Systems (SoS) that interact with each other and provide a unique capability that cannot be accomplished independently.
In July 2023, TSA published the TSA OA Roadmap (Roadmap). The Roadmap serves as a foundation for providing TSA’s vision, goals, and objectives to establish a connected transportation security SoS, using OA guiding principles. The Roadmap guides TSA’s OA activities and identifies short-term (within 3 years) and long-term (more than 3 years) needs to sustain success. It informs the development and management of other strategic plans, roadmaps and implementation plans across the TSA enterprise. This Industry Day supports Goal 1 of the Roadmap which outlines TSA’s commitment to Engagement with government, industry, and stakeholder organizations and specifically meets the Objective 1.1 to “Communicate and coordinate strategic and programmatic initiatives with government, and industry stakeholders organization and facilitate ongoing engagement.”
Event Date, Time, and Location
Event Name
TSA Open Architecture Industry Day
Date
June 18, 2024
Time
9:00 a.m. to 5:00 p.m.
Location
TSA Headquarters
6595 Springfield Center Drive
Springfield, VA 22150
Event Description
The full day event will include presentations and panel discussions across multiple relevant topic areas.
Tentative Agenda Attached
Attendees
Attendees should include representatives from institutions/companies within the aviation security industry or who work with aviation security technology. This may include federal labs, universities, and third parties that may find the presentations valuable to their research and development as related to the TSA mission. Small businesses are encouraged to attend.
Registration
This event is free, however advanced registration and approval of attendees by TSA is required. Due to space limitations, only two (2) representatives from each interested institution/company are allowed to attend. All attendees shall register by providing an email via a single point of contact per institution/company, to include the following information for each attendee:
This information shall be provided via email in a password protected attachment. A separate email providing the password shall be sent immediately thereafter. For non-U.S. citizens, additional personal information may be requested.
Registration requests must be submitted to ORCATechnologyConference@tsa.dhs.gov, no later than 5:00 p.m. EDT on May 1, 2024. Vetting will be completed by TSA and a final confirmation email with additional event details will be sent no later than May 31, 2024, to those who are authorized to attend the TSA Open Architecture Industry Day.
All questions in regards to this announcement and the Industry Day itself shall be addressed in writing to the following recipient: Sharlene.Williams@tsa.dhs.gov.
___________________________________________________________
*******TSA Open Architecture Industry Day - April 27, 2023 ********
The Transportation Security Administration (TSA) is hosting an Industry Day on April 27, 2023 on TSA’s Open Architecture (OA) initiatives and invites industry, academia, Department of Homeland Security components, congressional representatives, national labs, and government stakeholders to attend. The objectives of the Industry Day are to:
This event is free, however advanced registration and approval of attendees by TSA is required. The registration request with all information (see attachment for required information) must be submitted to email address ORCATechnologyConference@tsa.dhs.gov no later than 5:00 p.m. EDT on April 19, 2023.
Vetting will be completed by TSA and a final confirmation email with additional details regarding access will be sent to those authorized to attend.
All questions in regards to this announcement and the Industry Day itself shall be addressed in writing to the following recipient: Justin.Keear1@TSA.DHS.gov.
See attached document titled "TSA OA Industry Day Announcement" for additional information.
_____________________________________________________________
The purpose of this notice is to streamline and consolidate industry engagement and feedback related to Transportation Security Administration’s (TSA) Open Architecture (OA) initiatives. It is expected that TSA will release multiple open architecture artifacts and this notice serves as the centralized point for future efforts. This notice will be updated as appropriate.
The TSA’s mission is to protect the nation’s transportation systems to ensure the freedom of movement for people and commerce. To achieve this mission in an evolving threat environment, TSA must remain an agile and flexible organization that can rapidly field innovative screening solutions that improve TSA’s security posture. It is essential that TSA implements these innovative screening solutions in a manner that supports the Transportation Security Officer in conducting the critical screening functions and improves the passenger experience.
Open Architecture is a design approach where components, such as software and hardware, are standards-based and interoperable to allow a wide range of industry partners to create improved subcomponents (e.g., new detection algorithms, user interfaces, reporting systems, etc.). Leveraging an open architecture design approach will enable TSA to improve its security posture, support its frontline workforce, and promote an improved traveler experience. The successful implementation of this approach will require coordination across a wide range of partners to include government agencies, regulators, industry and international partners, national labs, academia, and airports.
_________________________________
The attached Roadmap is being issued in draft form to elicit comments from Industry. Comments are requested to be provided within twenty-one days of this posting/no later than March 2, 2023 via the attached Excel spreadsheet titled “OA Roadmap Industry Comments.” The Government will review Industry comments for market research purposes only. The Government does not intend to provide a response to comments submitted for this Roadmap; however, based on vendor comments, the Government may arrange a technical information exchange to clarify or expand on comments provided. This Roadmap does not commit the U.S. Government to any course of action in the future. The Government may or may not utilize Industry suggestions in finalizing the Roadmap and information based on comments may be shared with the public in the final draft of the Roadmap. No proprietary information shall be provided by Industry. Each respondent, by submitting comments, agrees that any costs incurred in providing comments shall be the sole responsibility of the respondent/vendor. The Government shall incur no obligations or liabilities whatsoever, to anyone, for costs or expenses incurred by the respondent/vendor in responding to this Request for Comments.
_________________________________________
The Transportation Security Administration (TSA) is issuing the attached Request for Information (RFI) to conduct market research to better understand vendor capabilities, qualifications, approaches, costs, risks, and technical challenges with regard to TSA’s vision of a connected transportation security system of systems based on open architecture principles and solutions.
Written questions concerning this RFI, should be emailed to siobhan.mullen@tsa.dhs.gov and siobhan.lawson@tsa.dhs.gov no later than 3:00pm EDT, February 20, 2023. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Respondents shall provide written responses to this RFI no later than Friday, March 3, 2023 at 3:00pm EDT to siobhan.mullen@tsa.dhs.gov and siobhan.lawson@tsa,dhs.gov. It is the Respondent’s responsibility to ensure the Government receives the Respondent’s email submission.
This RFI is issued solely for market research, planning, and information purposes in order to assist TSA. The Government will review vendor responses for market research purposes only. The Government does not intend to provide a response to submissions for this RFI, but the Government reserves the right to hold a technical information exchange meeting with all, none or some of the submitters, after review of the RFI submissions, at the agency’s discretion.
**********
PLEASE NOTE: Written questions concerning this RFI, should be emailed to siobhan.mullen@tsa.dhs.gov and siobhan.lawson@tsa.dhs.gov no later than 3:00pm EDT, February 20, 2023. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
______________________________________________________
****************Response date for RFI extended*************
Please note -- Respondents shall provide written responses to this RFI no later than Friday, March 10, 2023 at 3:00pm EST to siobhan.mullen@tsa.dhs.gov and siobhan.lawson@tsa,dhs.gov. It is the Respondent’s responsibility to ensure the Government receives the Respondent’s email submission.
NSN 1440-017021074, RAIL, LAUNCHER, GUIDE
The Defense Logistics Agency is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for NSN 1440-017021074, RAIL, LAUNCHER, GUIDE.
The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336415.
THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. Drawings are not available.
If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements.
The government will evaluate market information to ascertain potential market capacity to 1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; 3) implement a successful project management plan that includes: compliance with tight program schedules; cost containment; meeting and tracking performance; hiring and retention of key personnel and risk mitigation; and 4) provide services under a performance based service acquisition contract.
BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services are invited to submit a response to this Sources Sought Notice by October 31, 2024. All responses under this Sources Sought Notice must be emailed to DANISHA.WRIGHT@DLA.MIL. If you have any questions concerning this opportunity please contact: Danisha Wright (804-664-0424).
Norfolk Navy Ships and Surrounding Areas
The Defense Logistics Agency (DLA) Troop Support Subsistence Directorate intends to issue a solicitation for Subsistence Prime Vendor (SPV) support for Norfolk Navy Ships and surrounding areas.
Requirements for SPV support will include the delivery various quantities of subsistence items from the 8900 federal supply group or commercial equivalents. The contractor will be required to make delivery on a "just in time" basis. The delivery of items will be expected to begin no later than 120 days after the date of award. Offerors MUST be able to interface with the Government’s established transaction package and support Electronic Data Interchange transaction sets listed in the solicitation.
The resultant contract will be Fixed-Price subject to Economic Price Adjustments (EPA). The maximum dollar value of the entire acquisition is $975,000,000.
The Government’s intent is to award one (1) Long Term Contract. The effective period of the contract will be from the award date up to 60 months, consisting of a period of five (5) years comprised of three (3) separate tiers for purposes of distribution price. The first tier shall be a twenty-four (24) month period (inclusive of up to a 120-day implementation period). The second tier will be an eighteen (18) month period directly following the first tier. The third and final tier will be an additional eighteen (18) month period following the second tier.
The acquisition will use full and open competitive procedures and will be issued on an unrestricted basis. The proposals received in response to this solicitation will be evaluated utilizing Best Value Tradeoff procurement procedures and a contract will be awarded based on these criteria. Alternate items will be considered/evaluated.
The Request for Proposal (RFP) will be posted on the DLA BSM DIBBS website, https://www.dibbs.bsm.dla.mil/ as RFP # SPE300-25-R-0003. This solicitation is scheduled to be posted in January 2025.
Other fill-ins:
NAICS Code: 311999
The Marine Corps Recruiting Command (MCRC) has a requirement for a technology platform which allows recruiters in the 1st, 4th, 6th, 8th, 9th and 12th Marine Corps Districts (MCDs) to engage with their target market. This capability helps leverage mobile device management capabilities such as text and instant messaging for data collection and lead generation.
Please see attached RFI for further information and instructions for responses.
Information is for acquisition planning purposes only and is issued in accordance with FAR 52.215-3. No solicitation document exists at this time. Issuance of this notice does not constitute any obligation on the part of the Government to procure the service or to issue a solicitation. In addition, the Government is under no obligation to pay for information submitted in response to this RFI, and responses to this notice cannot be accepted as offers.
All responses shall be submitted to Aria Plewa at aria.plewa@marines.usmc.mil and Jeffrey Endicott at jeffrey.endicott@marines.usmc.mil no later than 4 December 2024, 4:00 PM EST.
Defense Human Resources Activity (DHRA) is hosting a hybrid THREE-PART Industry Outreach Symposium. The first two half day events will present information and updates on DHRA programs and upcoming acquisitions, each half-day will feature unique information (a draft agenda is included in the attachment to this notice).
Monday, November 18, 2024, 12:30pm-4:00pm EST - VIRTUAL
Tuesday November 19, 2024, 8:30am-Noon EST - VIRTUAL
Tuesday, December 3, 2024, 8:30am-12:30pm EST – ON SITE (GMU Van Metre Hall, Arlington, VA)
The first two half day events will present information and updates on DHRA programs and upcoming acquisitions, each half-day will feature unique information (draft agenda below). These events will be held in conjunction with the Virginia APEX Accelerator. There is no charge for the event. YOU MUST BE REGISTERED TO ATTEND. REGISTER FOR THE EVENTS AT THIS LINK: https://VirginiaAPEX.ecenterdirect.com/events/4433.
DHRA welcomes small business vendors and other industry partners to participate in this annual event and learn about organizational updates, mission and programs overview, and the latest on upcoming acquisitions. DHRA is a multi-faceted organization with a broad mission-set supporting defense civilians, service members and their families, reservists and veterans. Learn more about how our Centers and numerous programs serve the Department of Defense mission at www.dhra.mil.
Please reference the attachment for additional information.
Point of Contact: DHRA, Office of Small Business Programs, dodhraosbp@mail.mil
Learn more about DHRA Office of Small Business Programs here: https://www.dhra.mil/sb
