No telephone requests will be accepted.  Direct your requests and communications to ATTN:  DLA-AHCB, Harrison Mayfield, Contract Specialist, via email harrison.mayfield@dla.mil. For request for solicitation, provide your name, the company name, Cage Code and a telephone.

PRON: D14H0625D1.  The Government proposes to acquire on a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract, with a minimum quantity of 50 and maximum quantity of 100 each of a POWER SUPPLY; NSN: 6120-01-698-8519; Part Number: 11480837-10 applicable to the M-D6 PATRIOT weapon system.

Production Lead Time is 100 each, 330 Days After Contract Award (DACA) with deliveries to FORT BLISS, TX 79916-5801.

This procurement is sole source to Rantec Power System Inc, Cage Code 60132, 1173 Los Olivos Ave, Los Osos, California 93402-3230.

The AMC/ASMC code for this procurement is 3C.

Acquire, for the second or subsequent time, directly from the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity’s procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.

Firms that recognize and can produce the required item described above are encouraged to identify themselves.  Firms are encouraged to seek source approval in order to compete for future solicitations by accessing the website https://amcomdmz.redstone.army.mil/casl_cmo/casldba.casl_cmo_samsar and looking under Standardized Aviation and Missile Source Approval Request.  All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies.

The Federal Bureau of Prisons, Federal Correctional Institution, Talladega, intends to issue a solicitation 15B31325Q00000002 for the requirements of: QUARTERLY SUBSISTENCE   Dairy. FOB Destination, delivery dates will begin January 1, 2025, and end March 31, 2025. Deliveries will be made to Federal Correctional Institution, Talladega, 565 E Renfroe RD, Talladega, Alabama 35160. The contract type is firm‑fixed price. The Government reserves the right upon award to make a formal single or multiple awards. The Government will award to the responsible offer(s) whose offer, conforming to the solicitation, that are considered to be most advantageous to the Government, with past performance and price considered, price being rated higher than past performance. The solicitation will be made available on or about November 22, 2024, and will be posted to the SAM.gov website: www.sam.gov. All future information about this acquisition, including solicitation amendments, will also be distributed through this site. Interested parties are responsible for monitoring this site to ensure they have the most up-to-date information about this solicitation. The anticipated date for receipt of quotes is December 10, 2024. Payments will be made using Electronic Funds Transfer (EFT) or via Government Purchase Card for awards of $10,000.00 or less. Each offer is required per 52.212‑3 to complete their representations and certifications via the On line Representation and Certification Applications (ORCA) at http://orca.bpn.gov. Faith Based and Community Based Organizations (Aug 2005) are included. The point of contact for all information regarding this solicitation is R Woods, CS, at the address listed above and telephone number below. Completed offers may be emailed to: R3woods@bop.gov  and B7jones@bop.gov or mailed to the attention of R Woods, CS, FCI Talladega, 565 E Renfroe Rd, Talladega, Alabama, 35160. The anticipated award date is December 13, 2024.

The Technology Development Directorate (TDD) has a requirement maintenance and support for AdaCore software. The Ada software development suite is the existing complier used in the TDD software for the Guided Multiple Launch Rocket System (GMLRS) that provides multiple compilations, support for unit testing, and support for static code analysis.

Description:

This is a request for information (RFI) as a means of conducting market research to identify parties having an interest in and the resources to support this Directed Requirement for the Mobile-Long Range Precision Strike Missile (M-LRPSM). This is a follow-on RFI from the previous notice ID W31P4Q-24-R-0014 to address the refinement of requirements. The result of this market research will help further inform the acquisition strategy. The U.S. Government (USG) is seeking an immediate capability that is readily available to bridge a current gap/operational requirement. This capability must address the technical requirements outlined below. The current planned host vehicle for the capability will be an Organic IBCT vehicle. 

THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute an invitation for bid (IFB), request for quotation (RFQ), or request for proposal (RFP). This RFI does not constitute a commitment by the U.S. Army to procure products or services. THE USG DOES NOT INTEND TO AWARD A CONTRACT ON THE BASIS OF THIS RFI OR OTHERWISE PAY FOR THE INFORMATION SOLICITED. Submission of any information in response to this RFI is purely voluntary. Information submitted in response to this RFI is submitted at no cost to the USG and will not be returned. Any exchange of information shall be consistent with procurement integrity requirements, and all appropriate proprietary claims will be protected to prevent improper disclosure. No later than (NLT) 30 calendar days from the date of issuance, interested businesses should provide a Statement of Capability that clearly articulates their proposed solution along with information on company background and past performance relevant to the requirements stated in this RFI. The USG will only consider submissions that address the full scope of work outlined below.

Requirements:

The defining technical requirements for the M-LRPSM are as follows in order of priority:

1) Must be effective against various targets to include: Tier-1 through Tier-3 Armor (stationary and in defilade), Troops, Field Fortifications, and Urban Structures

2) Must have a direct strike capability at a range of 25km or greater

3) Time to target should be less than 150 seconds to achieve 20 km and less than 300 seconds to achieve 25km

4) Must be hosted by an Organic IBCT vehicle.

5) Should have the ability to adjust missile flight, retarget, and abort

6) Must be survivable and resilient (Objective) in denied, degraded, intermittent, and limited-bandwidth (DDIL) environments, enabling the system to operate and protect itself against attacks on embedded network, cyberspace, electromagnetic spectrum (EMS), and position, navigation, and timing (PNT) capabilities

7) Should have multiple missile launch capability (2 or greater per vehicle)

8) Should be sustainable through existing Army logistics

9) Must be maintainable within existing IBCT

Performance information requested:

• Concept of Operations and system overview including, but not limited to, size, weight, minimum and maximum range, power required, lethality, precision, time of flight to 25km, and number of missiles/launchers per vehicle.
• Key performance characteristics of proposed solution that support the above requirements by Technology Readiness Level (TRL)
• Details of any existing integration with IBCT vehicles
• Manufacturing Readiness Level (MRL) and supporting information
• Reloading concept to include required Materiel Handling Equipment.
• Training concept
• Maintenance and sustainment concept
• Shelf life of munitions and support equipment
• Historical test data or past performance data, if applicable.
• Current max production capacity including surge capacity and headspace available.

Cost information requested:

• Current pricing data on launchers, support equipment and munitions.
• Cost to support capability demonstration. Government will provide test range. Please include all assumptions used to calculate cost estimate such as but NLT recommended duration, level of support required, and travel.
• Cost estimate to achieve TRL of 7, if applicable. Please provide as much detail as possible to support cost estimate including but NLT labor, materials, subcontractor costs, other direct costs, and overhead rates.

Schedule information requested:

Procurement lead-time for available solutions to support a capability demonstration hosted* on the IBCT vehicle. Procurement lead-time for available production solutions from agreement award to delivery.

 *Hosted definition equates to a semi-permanent solution. i.e. The vehicle shall be able to be returned to the standard configuration.

Submission Instructions:

Interested parties are hereby invited to submit a response to this RFI not later than the response date listed below. Submitted capabilities statement shall be no more than ten (10) pages in length in Times New Roman font of not less than 10 pitch. All responses under this RFI must be in either Microsoft Word or Portable Document Format (PDF) and submitted via email to the Contracting Officer and Contract Specialist listed below. All data received in response to this RFI that is marked or designated as corporate or proprietary will be fully protected from any release outside Department of Defense and supporting Government SETA contractors.

Responses must address at a minimum the following items:

• Organization name, address, email address, web site address, telephone number, and CAGE code.
• Point of contact including name, title, phone number, and email address.
• Whether the business is currently classified as a Traditional or Non-Traditional Defense Contractor.
• Anticipated Non-Traditional Defense Contractor participation.
• Tailored capability statements addressing the requirements of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated to deliver technical capability, organizations should address the administrative and management structure of such arrangements. Responses should address cost, schedule and performance requests above. What type of work has your company performed in the past in support of the same or similar requirement?
• Can or has your company managed a task of this nature? If so, please provide details.
• What specific technical skills does your company possess which ensure capability to perform the requirements?
• Provide a statement including current small/large business status and company profile to include number of employees, annual revenue history, office locations, DUNs number, etc. Respondents to this RFI also must indicate whether they qualify as a Small, Small Disadvantaged, Women-Owned, HUBZone, or Service-Disabled Veteran-Owned Small Business Concern. Please note that under a Small-Business Set-Aside, in accordance with FAR 52.219-14, the small business prime must perform at least 50% of the work themselves in terms of the cost of performance. Provide an explanation of your company's ability to perform at least 50% of the requirements described in this RFI.

All questions must be sent to Andrea Dixon, Contracting Officer at andrea.s.dixon1.civ@army.mil and Lisa Ledbetter, Contract Specialist at lisa.r.ledbetter.civ@army.mil NLT 10 days from issuance of the RFI. Answers to all questions will be sent to all interested parties within 15 days from issuance of the RFI.

Due no later than 11:59 p.m. CST on 30 November 2024 and reference this notice ID in the subject line of e-mail and on all enclosed documents.

DO NOT SUBMIT CLASSIFIED MATERIAL.

Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submission.

This procurement is sole sourced to:
Beckman Coulter Life Sciences
5350 Lakeview Pkwy S Dr
Indianapolis, IN 46268

ANY ORGANIZATION WHICH BELIEVES ITSELF TO BE IN POSSESSION OF THESE CAPABILITIES
CAN PROVIDE WRITTEN EVIDENCE TO THIS EFFECT TO THE CONTRACTING OFFICER
AND MAY BE CONSIDERED FOR FUTURE PROCUREMENT ACTIONS.

***********************UPDATED 02 DECEMBER 2024**************************

-Meeting Location (physical) Changed: adds Bldg 251 as Conference Room Location

-Registration Details Changed: All vendors must complete visitor access procedures in order to be permitted access to the installation as early as within 10 days of arrival at https://pass.aie.army.mil/steps/branch_selection.  Vendors will provide confirmation email and provided identification at the gate in order to be provided access to the installation on the day of the event.

******************************************************************************

Please join us December 18th 2024, for an Industry Day hosted by the Louisville District Office for the Anniston Army Depot (ANAD) ERCIP Microgrid Construction project.

The Government is planning to issue a Design-Bid-Build Construction project to provide energy resiliency by providing an on-site, automated energy control / generation storage management system: Construct a microgrid system that will have full islanding capability. The microgrid will integrate the new and existing generation assets with the Nichols, Demil, and Eulaton 46kV / 12.47kV substations to enable islanding for all critical loads. During a grid outage, the automated switching and microgrid controls will enable direct routing of electricity generated by the onsite assets to mission critical loads and load shedding of large blocks of non-critical loads.  The microgrid will be designed in accordance Unified Facility Criteria 4-010-06 Cybersecurity of Facility Related Control Systems, or policy current at time of design, as well as with emerging distribution system operator requirements. This project will be tasked with Construct an installation-wide black-start capable microgrid incorporating 10MW of new firm natural gas (NG) generation and medium voltage distribution switchgear connected at the Eulaton substation that will be owned and operated by Anniston Army Depot (ANAD) to combine with ANAD existing Demil substation solar photovoltaic (PV) array, owned by Alabama Power Company (APC), and the existing Depot-owned NG generation. This project expands upon the previous FY20 ERCIP microgrid, which consists of a 7.5MW natural gas generation and an existing 2.65MW PV array installed at the Nichols substation. This microgrid will integrate the previous microgrid assets, as well as 4.75MW of additional existing APC-owned onsite solar PV at the Demil substation. Additionally, this project will install NG generators, SCADA microgrid controls and communication upgrades at the Nichols, Demil, and Eulaton substations, as well as substation interconnection points between the Nichols and Demil substations, and reclosers to isolate noncritical loads across the Depot. The completed system will utilize automatic switching to isolate from the APC’s electrical distribution system and prioritize critical loads to maintain continuity of operations across ANAD during electrical outages for a minimum of 14 days (required resilience period) IAW 10 USC 2914. Each generator will be equipped with a weather-proof sound attenuating enclosure. A fire hydrant along with a new water line will be installed by the new power plant. A storage shed currently located at the proposed project site will be relocated to a location determined by ANAD Directorate of Public Works (DPW) personnel. This project will tap into an existing natural gas line to feed the newly installed natural gas Reciprocating Internal Combustion Engine (RICE) generators.  Load shedding during utility outages via the microgrid switching system will also ensure continuous energy to critical loads regardless of the intermittency of solar power.

The microgrid system will support energy resiliency by providing on-site energy generation, this includes solar panels, mounts, inverters, transformers, controls and communication, AC/DC wiring with conduit, low voltage switchgear, and security measures.  The net metering and interconnection agreements will require approval by the utility provider.

NAICS CLASSIFICATION CODES: 237130 – Power and Communication Line and Related Structures Construction.

MEETING DATE & TIME: Wednesday, December 18th 2024, 9:00 a.m.–12:00 p.m. Eastern Time

MEETING LOCATION (physical): Bldg 251, Anniston Army Depot, Anniston, Al 36201

MEETING LOCATION (virtual): https://dod.teams.microsoft.us/l/meetup-join/19%3adod%3ameeting_28f2516e6d3244b3b1213669019634eb%40thread.v2/0?context=%7b%22Tid%22%3a%22fc4d76ba-f17c-4c50-b9a7-8f3163d27582%22%2c%22Oid%22%3a%22e77879b4-14f1-4ea0-8313-2748849cf054%22%7d

REGISTER: All vendors who plan to attend the Industry Day must notify MAJ Lesa Sylve at lesa.b.sylve@usace.army.mil with the following information: company name(s), UEI(s), number of attendees, and names of attendees.  Information must be submitted NLT Tuesday 3rd December, 2024 at 2:00pm Eastern Time.  All vendors must complete visitor access procedures in order to be permitted access to the installation as early as within 10 days of arrival at https://pass.aie.army.mil/steps/branch_selection.  Vendors will provide confirmation email and provided identification at the gate in order to be provided access to the installation on the day of the event.

REGISTRATIONS: System for Award Management (SAM): Offerors shall have and shall maintain an active registration in the SAM database at http://www.sam.govto be eligible for a Government contract award. If the Offeror is a Joint Venture(JV), the JV entity shall have valid SAM registration in the SAM database representing the JV as one business/firm/entity. If at the time of award an Offeror is not actively and successfully registered in the SAM database, the Government reserves the right to award to the next prospective Offeror.

QUESTIONS: We welcome your questions. Email any questions to lesa.b.sylve@usace.army.mil. Please note that the SAM.gov posting will be updated to include the Industry Day Presentation following the completion of the Industry Day.  The Solicitation Posting is upcoming in future postings.

 ***See FAR 52.212-01 and FAR 52.212-02 and the respective addendums to each clause in the RFP for detailed proposal instructions and evaluation criteria***

This is a synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. Solicitation Number FA8604-24-R-B013 is issued as a Request for Proposal (RFP). This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2024-03/02-23-2024 and DPN 20240326.  This acquisition is 100% set aside for small business. The NAICS CODE for this solicitation is 333922. This solicitation is subject to FAR Clause 52.219-14, “Limitations on Subcontracting (DEVIATION 2020-O0008).” FAR Clause 52.219-14 states that, for “Supplies, (other than procurement from a non-manufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the 50 percent subcontract amount that cannot be exceeded.”

This RFP has fourteen (14) line items. The performance, design, fabrication, installation, and test requirements for a Storage Aid System at Maxwell Air Force Base, Alabama. All solicitation specifications/drawings will be posted at the following location: http://www.SAM.gov.

Contract Completion is required within 230 days from date of award. FOB point is Destination (e.g., Maxwell Air Force Base, Alabama). Evaluation will be based on Lowest Price Technically Acceptable (LPTA).

The contractor must be registered in SAM prior to award. The Government will make an award from this request for proposal to the technically acceptable, responsible offeror whose proposal offers the lowest price to the Government. The Government reserves the right to not make an award at all.

All proposals are due by 4:00 PM Eastern Daylight Time on 22 July 2024.

Any proposal, modification, or revision that is received at the designated Government office after the exact time specified for receipt of proposals is “late” and will not be considered.

Please note that DoDSafe is required for proposal submission. Send requests for proposal submission to emily.gomez.3@us.af.mil and andrew.petersen.3@us.af.mil.

To ensure a competitive balance, at the Contracting Officer’s discretion, questions concerning this RFP will only be accepted until 15 July 2024 by 2:00 PM Eastern Daylight Time. Questions shall be submitted by e-mail to emily.gomez.3@us.af.mil and andrew.petersen.3@us.af.mil.

Be advised that offerors are not permitted to deliver proposals in-person.

No telephone, written, e-mail or fax requests for documents will be accepted; all interested offerors must download their own documents from the internet - no exceptions. All interested offerors are requested to register for this solicitation.

The Government reserves the right to cancel this solicitation either before or after the closing date.  In the event the Government cancels this solicitation the Government has no obligation to reimburse an offeror for any costs.

This is a Sources Sought Synopsis. This announcement seeks information from industry, which will be used for preliminary planning purposes. No proposals are being requested or accepted with this synopsis. This is NOT a Solicitation for proposals and No Contract shall be awarded from this synopsis. The U.S. Army Engineering and Support Center, Huntsville is soliciting comments on a Market Research basis for Electronic Security Systems services. No reimbursement will be made for any costs associated with providing information in response to this synopsis or any follow up information requests. Please note that we are seeking equipment manufacturers only; system integrators will not be considered.

The Sources Sought synopsis is to solicit input from manufactures about a Commercial Intrusion Detection System (CIDS) which will be used to protect sensitive conventional Arms, Ammunition, and Explosives (AA&E). The CIDS uses multiple transmission media (telephone, cellular, and internet protocol) to assure successful notification of alarm and status change conditions. The CIDS intended is to provide alarm and system status data from one or more protected areas to a UL Listed Central Station. Additional optional features for transmission of data and alarm annunciation to a local workstation, an enterprise security system, or a security system located in another geographic location may be provided. All additional features shall include safeguards and shall be user configurable, such that the features or options can be disabled in a secure manner by security system manager(s) without adverse impact on system performance.

The system contains several major components to include Digital Control-Communicator (DCC), Cellular Alarm Transmission Devices (CATD), and Internet Alarm Transmission Device (IATD). These components may be separate which work together in an interactive system or a single integrated component. We have provided information about the CIDS in a Functional Requirements Document (FRD) which outlines the systems purpose, components, and functions. We have also provided an excel CIDS Evaluation Matrix which lists each of the individual paragraphs and provides a space for comments beside each of them. We are asking that the CIDS Evaluation Matrix be completed and comments be made so that the point of contact listed below can fully evaluate the response for each of the items provided in the excel file. It should be stressed that we need responses to all of the requirements listed in the matrix in order to better evaluate the product.

Federal Bureau of Prisons - Federal Correctional Institution Aliceville, has issued a solicitation-15B31825Q00000002, for the requirements of 2nd Quarter FY25-Bread. Freight on Board (FOB) Destination delivery will begin on January 1, 2025. Deliveries shall be made to 11070 Hwy 14, Attn: Food Services Warehouse, Aliceville, Alabama 35442. The type of contract is Firm-Fixed Price. The Government reserves the right upon award to make a formal single or multiple awards. The Government will award to the responsible offer(s) whose offer, conforming to the solicitation, is considered to be most advantageous to the Government, with past performance and price considered (prices being rated higher than past performance).

All future information pertaining unto this acquisition, including solicitation amendments, will also be distributed solely through www.SAM.gov. Interested parties are responsible for monitoring this site to insure of having the most recent information about this solicitation. The deadline for receipt of quotes is on or before December 13, 2024, 4:00 P.M., Central Standard Time. Blank pages are unnecessary.

     Quotes received after closing date will not be considered. NOTE: ALL ITEMS WILL BE PAID via Electronic Funds Transfer (EFT). NO PURCHASE CARD. The Contracting Officer will verify registration prior to award by entering the potential awardee’s UEI number at www.sam.gov database.

No telephone requests will be accepted. Direct your requests and communications to ATTN: DLA-AHCB, Cheyenne Daniels, Contract Specialist, via email Cheyenne.Daniels@dla.mil For request for solicitation, provide your name, the company name, Cage Code and a telephone number.

PRON: D14F0260D1 The Government proposes to acquire on a One Time Buy, Firm-Fixed Price contract for a quantity of Nineteen (19) each of a CABLE AND CONDUIT, NSN: 6150-01-118-0801; Part Number: 10253840-49 applicable to the PATRIOT weapon system

THIS ITEM IS 100% SMALL BUSINESS SET-ASIDE

Production Lead Time (PLT) with Government Production Lot Test is 19 (nineteen) each, 90 Days After Contract Award (DACA).

Please see Solicitation Amendment attached for your reference. 

MOBILE HARBOR, ALABAMA, DEEPENING AND WIDENING - PHASE 6 - PRE-BID MEETING, SIGN-IN SHEETS, AND SLIDES.

19 November 2024:  Product Service Code updated to: 1520, NAICS updated to: 336413

SYNOPSIS: This Request for Information (RFI) is for source planning purposes only and shall not be considered as an invitation for bid, requests for quotation, request for proposal, abstracts, or as an obligation on the part of the Government to acquire any products or services. Your response to this RFI will be treated as informational only. No entitlement to pay, direct or indirect costs, or charges to the Government will arise, as a result of a contractor's submission of a response(s) to this announcement or the Government's use of such information. This request does not constitute a solicitation for future proposals or the authority to enter into negotiations to award a contract. The information provided may be used by the Government in developing its source acquisition strategy and Statement of Work/Statement of Objectives and performance specifications. The Government does not intend to award a contract solely on the basis of this RFI or to otherwise pay for the information submitted in response to this RFI. The purpose of this RFI is to gather information that will assist the Utility Helicopters Project Office (UHPO) in evaluating vendor capability of meeting its potential need. The Government has not determined the final acquisition approach. This market research will allow the UHPO to make an informed decision about how to proceed.

It is contemplated that this award will be made on an Other Than Full and Open Competition (FAOC), Sole Source basis in accordance with Federal Acquisition Regulation (FAR) 6.302-1. The Government intends to increase the ceiling of an existing contract – W58RGZ-24-D-0059 - a Cost Plus Fixed Fee (CPFF)/Firm Fixed Price (FFP) contract for these requirements. The anticipated contract period of performance is June 2024 through June 2029.

This RFI is applicable to the following UHPO Mission Design Series (MDS): UH-60M, HH-60M, UH-60L, HH-60L, UH-60A and HH-60A for Army, Department of Defense (DoD) agencies, Foreign Military Sales (FMS) and Other Government Agencies (OGA). The Government does not own the complete H-60 Technical Data Packages (TDPs) that established the current and baseline H-60 MDS configurations, including system/subsystems drawings, tooling drawings, software source code or models and simulations.

The intent of this RFI is to determine industry capabilities to design, develop, test, integrate, validate and verify hardware and software systems, subsystems and system of systems, maintain configuration management, manage obsolescence, develop and update the Integrated Logistics Support (ILS) documentation to support each H-60 MDS configuration. System and subsystems must meet Airworthiness Release (AWR) criteria and be able to be integrated into the UH-60M and HH-60M production helicopters via Engineering Change Proposals (ECP), with an objective of integrating common systems and subsystems into all H-60 MDS configurations while minimizing the logistics infrastructure.

The vendor must be capable of sustaining and maintaining the inherent H-60 MDS configuration over its lifecycle that maintains the inherent technical, suitability and functional performance, safety, reliability, sustainability and maintainability characteristics.  The vendor must maintain an office with technical, logistic and contracting personnel in Huntsville, AL vicinity.  The vendor must be able to obtain and maintain personnel and facilities at the SECRET clearance level.  The Government desires that all software and hardware have, at a minimum, Government Purpose Rights (GPR) and software development meets Capability Maturity Model Integration (CMMI) level III criteria and processes.

The vendor must be capable of complying with the Safeguarding of Controlled Unclassified Technical Information clause in DFARS 252.204-7012, have a Cybersecurity program that follows the National Institute of Standards and Technology (NIST) Framework for Improving Critical Infrastructure Cybersecurity document at a minimum, and subsequent compliance assessments performed by the Government.

RFI Requirements - Description of Information Requested

1.  Provide company information including:

   a. Company name and address.

   b. Size of company (number of personnel, total revenue, ownership, CAGE Code, Parent Corporation, etc.).

   c. Point(s) of contact including name, phone number, address, and email and length of time in business.

   d. Geographic presence.

2.  Describe your organization's experience with similar efforts.

3.  Describe how your organization would support the complete lifecycle of each H-60 MDS as outlined in this RFI:

   a. TDP availability

   b  System Safety

   c. Production Integration

   d. Inherent system performance and suitability

   e. ILS and associated documentation

   f. Facilities and personnel resources

   g. Flight Operations

4.  Address how to ensure an adequately experienced and trained staff, your process for verifying qualifications, education, certification, and professional requirements and how often this information is obtained or updated.

5.  Describe how your organizations Cybersecurity policy and practices align with the provided references.

6.  Provide recommendations on benchmark skills or criteria used to evaluate quality analysis, including analytic tools and writing techniques.

7.  Identify conditions or issues requested in the RFI that cannot be met or may interfere with the intention of this project.

8.  Provide any other pertinent information that will assist the Government in this assessment.

This is NOT a solicitation for proposals, proposal abstracts, or quotations. The purpose of this notice is to obtain information from industry vendors regarding their interest, capabilities, and recommendations in developing proposals for the UHPO, Program Executive Office, Aviation (PEO Aviation). SERVICE DISABLED VETERAN OWNED SMALL BUSINESSES ARE ENCOURAGED TO RESPOND. Include whether or not you are a small business; HUB-Zone Small Business; Service-Disabled Veteran Owned, Veteran-Owned Small Businesses; Women-Owned Small Business; or Small Disadvantaged Business in order to assist the Government in determining the appropriate acquisition method, including whether a set-aside is possible.

Electronic transmissions must not exceed 5 megabytes and responses in the form of white papers should be limited to 25 pages in length and may include technical specifications and product sheets as deemed necessary. All material submitted in response to this RFI must be unclassified.

All interested firms with capabilities identified herein are encouraged to respond to this RFI, by technical questions, data requests and inquiry. 

All responses to this RFI may be submitted via e-mail to Oren Gilbert, Contract Specialist at oren.l.gilbert.civ@army.mil courtesy copy Contracting Officer, LaNita McGraw-Holloway at lanita.m.mcgraw-holloway.civ@army.mil.

Contracting Office Address:

ACC-RSA - (Aviation), ATTN: CCAM-BHB, Building 5308, Martin Road, Redstone Arsenal, AL 35898-5280

The Contractor shall deliver a new Clark ® or equal 5,000 lb. capacity 36-48 volt, 4-Wheel sit down Counterbalanced, pneumatic tire forklift truck to the SAM warehouse located 1242 Montlimar Drive, Mobile, AL. The units provided under this procurement shall meet the technical requirements listed below. The contractor shall provide all labor, equipment, assembly, materials, management, supervision and other associated services (i.e. delivery, transportation and demonstration) necessary to supply and deliver the items listed above. The contractor shall provide onsite operation demonstration of the equipment. The contractor shall provide a final dealer checkup after delivery and training to ensure proper functionality. The contractor shall provide at a minimum a one-year warranty. ( See attached Technical Requirement for detail)

ALL QUESTIONS MUST BE SUBMITTED IN WRITING, NO PHONE CALLS PLEASE. 

The Federal Aviation Administration is conducting a Market Survey/Request for Information to gain understanding of the current marketplace and to identify responsible, capable sources. Responses to this Market Survey will be used to determine if there is adequate competition to set this requirement aside for Small Disadvantaged Businesses.  This survey is being conducted in accordance with FAA Acquisition Management System (AMS) Section 3.2.1.2.1 for the purpose of soliciting statements of interest and capabilities from interested vendors.  This survey will be utilized for acquisition planning, as well as to determine if there are any responsible small disadvantages businesses or other small businesses capable of performing this project.

This Market Survey is for the requirement to perform the Replacement of the Sewage Lift Station and 2" Water Main & 3" Force Main located at Montgomery Air Traf􀏐ic Control Tower, Montgomery Regional Airport, Montgomery, AL.

The FAA anticipates issuing the formal Request for Proposals (RFP) during the month of October 2024. Responses to the RFP will be due approximately 30 days after RFP issuance.  Proposals/Offers will be evaluated in accordance with terms noted in the RFP and a subsequent contract award will be made shortly thereafter.

All responses to this Market Survey will be used for informational purposes only.  This is not a screening information request or request for proposal of any kind.  The Federal Aviation Administration (FAA) is not seeking or accepting unsolicited proposals at this time. Presently, the nature of the competition has not been determined.  Upon solicitation the FAA may decide to do a full and open competition or set aside all or part of the procurement for small businesses, service-disabled veteran-owned small businesses, woman owned small businesses or eligible socially and economically disadvantaged businesses that are certified by the SBA for participation in the SBAs 8(a) Program. 

All interested vendors are advised that the FAA will not pay for any information, or any administrative costs incurred that are associated with any response received in response to this Market Survey. Therefore, any costs associated with Market Survey submissions will be solely at the interested vendor's expense.

The FAA is seeking eligible responsible contractors who would be interested in the performing the Replacement of the Sewage Lift Station and 2" Water Main & 3" Force Main Project located at Montgomery Air Traffic Control Tower, Montgomery Regional Airport, Montgomery, AL in accordance with the published Statement of Work (SOW).

SECTION I:  Description of work to be performs:

Project Description: 

This project will require the successful Contractor to furnish all necessary supervision, labor, material, equipment, transportation, and services to complete the Replacement of the Sewage Lift Station and 2" Water Main & 3" Force Main Project.

PLEASE NOTE: The Successful Offeror will be responsible & required to perform all of the aforementioned tasks under the contract award.

This Market Survey will serve as a market analysis to assist the FAA in determining which procurement method to use.  The failure to obtain adequate responses from responsible SBA 8(a) firms or other small businesses may result in the determination to conduct this procurement action under full and open competition.

SECTION II – CAPABILITY STATEMENT:  In order to make this determination the FAA requires the submission of the following information from interested vendors:
All respondents must provide a Capability Statement that addresses the following (in order):

a. Type of services provided by interested firm that demonstrate its ability to perform the services described in the Project Description.

b.   Services provided under previous contracts that are similar in size, scope and complexity to this effort.  Provide detailed information and past performance information for at least three (3) previous contracts including program title, customer name, project dates, project value, customer point of contact, and description of work performed.

c. Respondent’s access to additional resources, skills, subcontractors, etc, if necessary to perform the contract.  If subcontracting, teaming, or partnering arrangements are anticipated, those arrangements must be identified, as well as the estimated percentage of the total effort that each subcontractor, partner, or team member will provide of the total effort.

d.  Copies of certification letters from all responding small businesses, service-disabled veteran-owned small businesses, woman owned small businesses or eligible socially and economically disadvantaged businesses that have been certified by the Small Business Administration (SBA), if applicable. 

Response submittals must include the following information:

A)   Name of company
B)   Address
C)   Phone and Fax number
D)   Point of contact
E)   Email address
F)   Business size status:  8(a), Small Business, SDVOSB, VSB, WOSB etc.

G)   Verification of registration in the System for Award Management (SAM)
H)   Any other pertinent information.

Information on pricing is NOT required. However, if vendors submit General information on prices/costs or a commercial/catalog price list, the FAA may use the information for informational purposes only and is NOT binding in any way.   Note if you are viewing this announcement from other than the FAA's contract opportunities website, attachments may not transfer correctly.  This Posting is best viewed at FAA Contract Opportunities thru the www.sam.gov website; therefore, please visit SAM.gov.

All responses to this Market Survey must be received by 18 October 2024, 5:00 PM EDT.  All submissions must be submitted via email to my attention at regina.singleton@faa.gov; however, the FAA will not be responsible for any failure attributable to transmitting or receiving the submittal.

Please refer all questions in “writing” only to regina.singleton@faa.gov.

All changes (if any) to the subject Market Survey will be promptly posted to the applicable FAA Internet web page at: www.sam.gov and complete adherence to the published changes is required. Please visit www.SAM.gov. No individual notification of any amendments will be provided. It is the Offerors' responsibility to visit this website frequently for updates on this procurement. 

This Notice is for informational purposes for Minority, Women-Owned and Disadvantaged Business Enterprises: The Department of Transportation (DOT), Office of Small and Disadvantaged Business Utilization, has a program to assist small businesses, small businesses owned and controlled by a socially and economically disadvantaged individuals, and women-owned concerns to acquire short-term working capital assistance for transportation-related contracts. Loans are available under the DOT Short Term Lending Program (STLP) at prime interest rates to provide accounts receivable financing. The maximum line of credit is $750,000. For further information and applicable forms concerning the STLP, call the OSDBU at (800) 532-1169.

The 42d Contracting Squadron, Maxwell AFB, AL, is seeking qualified sources that can provide online legal information services; an interface between Government systems and the vendor databases for access, issuing of user IDs and customized database usage reports, and related customer support services such as training and telephone and online assistance for legal personnel in the Air Force, Army, Marine Corps, Navy, Defense Logistics Agency (DLA) and Defense Contract Management (DCMA). Therefore, the Government is requesting responses from interested concerns capable of satisfying all requirements described in the attached draft Statement of Requirements (SOR). All feedback and information received may be used to determine the appropriate acquisition strategy.

NSN

1)4710-01-574-9061                 part number: 12491038

2) 4710-01-574-7826                part number:  12491138

3) 4710-01-574-9050                part number:  12491137

4) 4710-01-574-9062                part number:  12491131

Item Name: Tubing Assembly 

Response Date: 9 October 2024

The Government intends to solicit, negotiate, and award a two and one-half years contract extension to the Automotive Gas Turbine (AGT) 1500 engine original equipment manufacturer Honeywell International Inc. of Phoenix, Arizona, Commercial and Government Entity Code (CAGE):  99193, on a sole source basis under the authority of FAR 6.302-1, “Only one responsible source and no other supplies or services will satisfy agency requirements.”  The extension will be awarded on the Total InteGrated Engine Revitalization (TIGER) III requirements Contract W56HZV-20-D-0062 and will include Firm-Fixed-Price (FFP), Cost-Plus-Fixed-Fee (CPFF) Completion and CPFF Term Contract Line Item Numbers (CLINs) to continue support for AGT1500 platform requirements including the acquisition of hardware, program services, and systems technical support engineering services.

Contracting Office Address:

U.S. ARMY CONTRACTING COMMAND, DETROIT ARSENAL, MICHIGAN 48397-5000

Point of Contact(s):  Thomas Monette, Contract Specialist, thomas.j.monette6.civ@army.mil

The Army Contracting Command - Redstone (ACC-RSA), on behalf of the Program Executive Office (PEO), Combat Support & Combat Service Support (CS & CSS); Product Director, Test, Measurement & Diagnostic Equipment (PD TMDE), Redstone Arsenal AL; as part of the Test Equipment Modernization (TEMOD) Program; is currently seeking sources for a new Counter, Electronic: AN/USM-459B Replacement, and/or to verify if industry has, or intends to have in the near future, a single, commercial-off-the-shelf instrument that can replace the AN/USM-459B Electronic Counter.
The replacement Electronic Counter shall be lightweight, handheld, and meet and/or exceed the baseline functions and parameters as detailed in the draft Purchase Description TEMOD-23-03 “Purchase Description for the Counter, Electronic: AN/USM459B Replacement.” Specifications: See draft Purchase Description TEMOD-23-03 “Purchase Description for the Counter, Electronic: AN/USM-459B Replacement.” for further information. Planned Acquisition: The solicitation announcement and release will include all pertinent information for interested sources to submit their best offers. Bid samples will be required. This procurement will result in a firm fixed price, multiple year, indefinite delivery - indefinite quantity contract. Submission Information: All interested sources should submit their responses to Ms. Martha White via email: martha.c.white8.civ@army.mil and Mr. Taven Graves via email: taven.l.graves.civ@army.mil.  Please include company name, address, telephone number, email address, technical point of contact and company size (please specify as either a Large Business, Foreign-Owned Business, Small Business, Small Disadvantaged Business, 8(a) concern, Woman-Owned Small Business, Historically Underutilized Business Zone concern, Veteran-Owned Small Business, or Service-Disabled Small Business). As part of this submission, interested sources should submit their completed Independent Evaluation Plan Questionnaire and AN/USM-459B Replacement Purchase Description Questionnaire, which are included as attachments to this announcement. Submittal of information is requested via electronic mail only, no later than                4 December 2024  3:00PM Central Standard Time.
*Please note: This market survey is for information and planning purposes only. It does not constitute a pre-solicitation notice, and it is not to be construed as a commitment by the Government. THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION. Please be advised that the Government will not pay for any information submitted as a result of this announcement. If a formal solicitation is generated at a later date, a pre-solicitation notice will be published. Results of this Market Research will be used by the TEMOD program to finalize the purchase description. As tentatively planned, once the sources sought has closed, the project leader will contact each responding vendor and invite them to attend the TEMOD Product Working Group meeting with industry. Each vendor's submission will be discussed privately, on a one-on-one basis, between that vendor and the Government.
 

The U.S. Army Rapid Capabilities and Critical Technologies Office (RCCTO) is issuing a Request for White Papers (RFWP) with intent of awarding Other Transaction Agreement for Prototype (OTAP) IAW 10 U.S.C. § 4022. Only U.S. companies with the ability to process and store SECRET information and hardware are eligible to submit a white paper.

Please refer to amended Request For White Paper (RFWP) Rev 1 document for additional information.

GENERAL SERVICES ADMINISTRATION (GSA) SEEKS TO LEASE THE FOLLOWING SPACE:
CITY, STATE: MOBILE, ALABAMA

Area Of Consideration:
North: Congress Street
East: Water Street
South: Canal Street
West: Broad Street

Space Type(s):
Office
Minimum Sq. Ft. (ABOA): 6,247
Maximum Sq. Ft. (ABOA): 6,300
Reserved Parking Spaces (Total): 1
Reserved Parking Spaces (Surface): 1
Reserved Parking Spaces (Structure): 0

Term:
Initial Full Term: 120 Months
Initial Firm Term: 96 Months
Termination Rights: 90 Days
Option Term: None

Additional Requirements:
No Law Enforcement Agency Offices On Premises,

Space Located in an Office Building

Access to Public Transportation should not exceed .25 Miles from the building entrance

Solicitation Notice Page 3 of 3 Solicitation Notice Solicitation Notice Page 1 of 3 THIS IS A SOLICITATION NOTICE Solicitation Number: 36C24724R0079 The solicitation is issued on an unrestricted basis all businesses are invited to participate. The NAICS code is 623110, Nursing Care Facilities (Skilled Nursing Facilities) with a $34M size standard. The solicitation will be issued as an open and continuous basis and will be available to vendors from the date of issuance of the solicitation and continuing for one year. During that period all interested parties are invited to submit a proposal for consideration. It is anticipated that the solicitation will be issued on/about June 20, 2024. This acquisition is to provide Community Nursing Home (CNH) services in the Birmingham VAMC catchment area. The following counties are included in this catchment area: Lauderdale, Morgan, Colbert, Marshall, Franklin, Dekalb, Limestone, Cherokee, Lawrence, Etowah, Winston, Calhoun, Walker, Cleburne, Madison, Clay, Jackson, Talladega, Shelby, Jefferson, Blount, Cullman, St Clair and Lawrence counties. The Contractor shall furnish all supplies and services, at the per diem rates for the Levels of Care specified.  Nursing home facilities in the CNH program shall ensure that care meets the health needs and promotes the maximum well-being of VA patients. Nursing home care will be furnished to ensure the total medical, nursing, and psychosocial needs of VA beneficiaries. All nursing home facilities in VA s CNH program must have current Center for Medicare and Medicaid Services (CMS) certification (Medicare and/or Medicaid) and a state nursing home license. VA often has a particular need for specialty care services in the CNH program. The VA requires CNHs to have bed capacity to ensure their ability to take referrals when requested. The CNH also must be able to accept VA referrals in a timely fashion (ideally within 24 hours of request). Provider visits will be available at the rate of one (1) visit per month. Laboratory, x-ray, and other special services will be available to VA patients as needed. In addition, the care provided will include room, meals, nursing care, and other services or supplies commensurate with the VA-authorized level of care, without extra charge. Duly authorized representatives of VA will provide quality oversight visits to veterans placed to assure continuity of care and to assist in the veterans transition back into the community, when applicable.   It is anticipated that single award Indefinite Delivery Indefinite Quantity (IDIQ) contracts will be awarded from this solicitation. The capacity of each IDIQ will be based on the estimated value for a Nursing Home in each specific county and will range from $750,000 to $3,000,000. The period of performance for each IDIQ will be based on the award date and will continue for 5 years. Any questions regarding this acquisition can be directed to Contract Specialist William Prenzler William.prenzler@va.gov and Contracting Officer Laurinda Millage Laurinda.millage@va.gov .

This partnering opportunity is in response to the anticipated NASA Announcement of Opportunity (AO), expected to be released no earlier than quarter for (Q4) of fiscal year (FY) 2025 for planning purposes. NASA’s George C. Marshall Space Flight Center (MSFC) is developing a mission concept to be proposed for this AO. The partnership opportunity is being issued to select a teaming partner
to provide a spacecraft bus.

The 42nd Contracting Squadron at Maxwell AFB, AL hereby gives NOTICE OF INTENT TO SOLE SOURCE to contract with Embassy Suites by Hilton Montgomery Hotel & Conference Center to support the 2025 Alumni of Distiction Seminar.

Brief Description of Requirement: Air University International Affairs has a requirement for a full-service conference center that provides meeting rooms with appropriate furnishing, lodging, audio-visual equipment, technical support, and light refreshments. The full-service conference center shall be located in Montgomery Alabama and within a 10-mile radius of Maxwell Air Force Base. The service requirement is for the following: (1) one large meeting room that can support up to 75 attendees, (2) one breakout room with tables that can accommodate up to 75 attendees (3) two small meeting rooms that can accommodate up to 10 people, (4) appropriate audiovisual equipment, (5) WiFi compatibility, (6) adequate parking, (7) and available lodging for up to 45 guests.  The International Alumni of Distinction Seminar is a 6-day event (13-18 April 2025) that includes arrival, seminar training days, and departure.

The 42nd Contracting Squadron at Maxwell AFB, AL intends to award a sole source contract to Ex Libris (USA), Inc. 1350 E Touhy Ave, Ste. 200E, Des Plaines, IL 60018-3307 for the purchase of Alma & Primo Software Upgrades. The Air University Library (AUL) requires Alma Library Services Platform & Primo Discovery Software Service Subscription and Maintenance from the Ex Libris (USA), Inc. Ex Libris (USA), Inc. holds proprietary rights to these software products and retain the exclusive trademark, copyrights, trade secrets and/or patent rights.